Bedienungsanleitung Futaba FX36 (Seite 8 von 183) (Englisch)

747922

Zoom out

Zoom in

Vorherige Seite

1/183

Nächste Seite

＜ Introduction ＞

Never disassemble or modify the SD card.

Do not bend, drop, scratch or place heavy ob-

jects on the SD card.

If smoke or an abnormal odor emanates from the

card, immediately turn oﬀ the transmitter power.

Since the SD card is an electronic device, be

careful of static electricity.

■ Static electricity may cause erroneous operation or

other trouble.

Do not use the SD card near radio and televi-

sion sets, audio equipment, motors and other

equipment that generates noise.

■ Doing so may cause erroneous operation.

Do not store the SD card in the following places:

・ Where the humidity is high

・ Where the temperature diﬀerence is severe

・ Where it is very dusty

・ Where the card will be exposed to shock and vibration

・ Near speakers and other magnetic devices

SD Card (Commercial Product) Handling Precautions

WARNING

CAUTION

*Read the instruction manual supplied with the SD card for details.

● Recorded data

The data recorded on the SD card cannot

be compensated regardless of the contents

or cause of the trouble or obstruction.

Futaba does not perform data restoration or

recovery work.

Do not use the SD card where it may be ex-

posed to water, chemicals, oil, or other ﬂuids.

■ Doing so may cause a ﬁre or electric shock by short cir-

cuiting.

Do not insert foreign matter into the transmit-

ter card slot.

■ Doing so may cause erroneous operation.

Do not expose the card to shock and vibration

and do not remove the card from the card slot

while data is being written or read.

■ The data may be damaged or lost.

Keep wireless equipment, batteries, aircraft,

etc. away from children.

Do not directly expose plastic parts to fuel, oil,

exhaust gas, etc.

■ If left in such an environment, the plastic may be damaged.

■ Since the metal parts of the case may corrode, always

keep them clean.

Storage and Disposal Precautions

Other Precautions

WARNING

CAUTION

Do not store wireless devices in the following

places:

・ Where it is extremely hot (40℃ [104 ℉ ] or higher) or

cold (-10℃ [14 ℉ ] or lower)

・ Where the equipment will be exposed to direct sun-

light

・ Where the humidity is high

・ Where vibration is prevalent

・ Where it is very dusty

・ Where the device may be exposed to steam and heat

CAUTION

When the device will not be used for a long

time, remove the batteries from the transmitter

and aircraft and store them in a dry place where

the temperature is between 0℃ and 30℃ [32

℉

and 86

℉

■ Leaving batteries inside your model and radio when

they are not being used for long periods will result in

battery deterioration, liquid leakage and other damage.

Always use genuine Futaba products such as

transmitter, receiver, servo, ESC, battery, etc.

■ Futaba is not responsible for damage sustained by

combination with parts other than Futaba Genuine

Parts. Use the parts speciﬁed in the instruction manual

and catalog.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba FX36 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Futaba FX36

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info