Bedienungsanleitung Futaba T14-MZ (Seite 104 von 127) (Englisch)

520093

104

Zoom out

Zoom in

Vorherige Seite

1/127

Nächste Seite

104

●Return to Model Menu

RUD to ELE

[Corresponding model type]: Airplane, general

This function is used when you want to mix

elevator operation with rudder operation. It is used

to correct undesirable tendencies when rudder was

applied in roll maneuvers, knife edge, etc. of stunt

planes.

● A mixing curve can be set.

● Mixing during ﬂight can be turned ON/OFF by

setting a switch. (Always ON at NULL setting)

● The amount of correction rudder can be

memorized by using the Memory function. This is

● Touch the [RUD to ELE] button in the Model Menu to

call the setup screen shown below.

● Mixing curve setting

(For a description of the curve setting method, see

the description at the back of this manual.)

● Fine tuning VR setting

● When [INH] is touched, the memory

items are displayed.

convenient at mixing curve setting. When memory

operation (switch operation) is performed with

correction rudder applied in the Memory Mode,

the stick position at that time is displayed on the

mixing curve. The point is automatically reﬂ

ected

in the curve. (When the Memory function is used,

"Line" is automatically selected as the curve type.)

● Link can be set: Links this mixing to other mixings.

● The mixing rate can be ﬁ

ne-tuned by setting a VR.

(Fine tuning)

● Overall

adjustment

by Rate A

and Rate B

● Group/single mode switching (Gr./Sngl)

(For more information, see the description at the back of

this manual.)

Setting method

● Touch the "INH" button, and set the function to

ACT(ON).

● When setting a switch, touch the "NULL" button

to call the <Switch> screen, and then select the

switch and set its ON direction. (Always ON at

"NULL" setting)

(For a description of the switch setting method,

see the description at the back of this manual.)

● When setting a VR, touch the Fine Tuning "NULL"

button to call the <Switch> screen, and then

select the VR. The ﬁ

ne tuning rate and adjustment

direction can be set.

The VR operation mode can also be set.

(For a description of the ﬁne tuning VR setting

method, see the description at the back of this

manual.)

● The curve display mode can be changed.

Single : Displays the mixing curve only

Fine Tuning : Displays the ﬁne tuning rate of the

ﬁne tuning VR

All Cond. : Displays the mixing curve of all the

conditions (When conditions are set)

● When setting Link, touch the Link button and set it

to ON.

Memory function usage method

(Example) Using the memory function with an F3A

airplane (knife edge correction)

When call switch

[SW-A] and memory switch

[SW-H] were set

[Memory function operation]

1. Memory function mode: [Manual]

[Memory]

2. When the memory switch (SW-H) is set to ON

while performing elevator correction when

rudder was applied at knife edge, the point

position at that time is memorized. Memorization

is performed while changing the left and right

stick positions.

. To recall the memorized positions, set [SW-A] to ON.

The memorized correction rate is reﬂected on the

curve, and operation is simultaneously set.

Note: When memorized from manual before ﬂight, be sure that

the memory SW is not accidentally set to ON and incorrect

mixing setting is not applied when taxiing, starting the engine,

etc.

● Mixing curve setting

● Fine tuning VR setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba T14-MZ Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Futaba T14-MZ

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info