Bedienungsanleitung Futaba T6J - 2.4GHz (Seite 7 von 94) (Englisch)

566460

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Descriptions:

Note: A: indicates functions that are only found when the T6J is in the ACRO (airplane) mode. H: indicates

functions that are only found when the T6J is in the HELI (helicopter) mode. If neither an A: or H: is

indicated the function is applicable to both ACRO and HELI modes.

Aileron, Elevator and Rudder dual rate switch: use this switch to select between two aileron, elevator and

rudder control throw settings. The throws can be set up however you prefer. Generally speaking, when the





applicable. Note: The T6J allows modelers to assign the dual rates to various switches. Please refer to the

dual rate section of this manual for additional information.

A: Flaps/channel 6- This switch operates the servo connected to channel six in the receiver. If your model







H: Throttle hold switch-

throttle stick. It is commonly used to practice autorotation skills for helicopter pilots.

Neck strap hook:

strap allows the transmitter to hang around the neck and relieve some of the weight from your hands.

Aileron/elevator control stick: Operates the servos connected to channel 1 (aileron) and channel 2 (elevator)

in the receiver. (Mode 2)

Trim levers (all): Used to shift the neutral or center position of each servo as labeled in the diagram. Once

any trim lever is operated, the trim position is displayed on the LCD screen.

Note:

trim does not affect the throttle servo when the throttle control stick is all the way up (so idle rpm can be

adjusted without affecting throttle settings through the rest of the stick movement).

Charging jack: Port used for charging the transmitter batteries (if applicable). The T6J does not include

rechargeable transmitter batteries or the AC charger. However, these items are available separately at your

local hobby shop, if desired.

On/Off switch: Used to power the T6J on or off.

DATA Input Lever: Used to change the values of the various functions displayed on the LCD screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba T6J - 2.4GHz Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info