Bedienungsanleitung Futaba T6J - 2.4GHz (Seite 21 von 94) (Englisch)

566460

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

current, active model will be blinking.

Note: If the END key is held down for 0.5 seconds, the transmitter will return to the default screen and will

then display the current trim settings. When using the END key, press and release it to scroll through the

options.

4) To select a different model memory press the DATA INPUT lever and hold it downward or upward for

0.5 seconds until the desired model number appears. Release the DATA INPUT lever when the next model

memory (MODL) appears on the LCD. Continue repeating this procedure until the desired model memory

appears on the screen. Each time a new model memory is brought forth the T6J will emit a single audible

beep.

5) With the desired mode memory (MODL) on the screen, all programming inputs from this point forward

will affect only the model number on the screen (until another model number is selected).

Model Name function-



T6J allows up to four characters to be used in the naming designation for each model memory. By giving

each model a name that is immediately recognizable, you can quickly select the correct model, and minimize



Note: In addition to the model naming designation, the model memory number will also be present on the

home screen. This is an additional safety feature and will serve to also assist in model recognition.

Note: It is possible to change model names at any time, without impacting any of the other programming or

settings that have been input.

To assign a model name to a model memory location:

1) Turn the transmitter on.

2) Press and hold the MODE button to access the programming mode. An audible

double beep will be heard and the screen will display the model selection menu

(MODL). The number of the current, active model will be blinking. Select the

model you wish to name using the model memory select instructions above.

3) With the desired model memory on the LCD, press the SELECT key. The current

model naming designation will begin blinking on the screen.



or downward until the desired character appears on the LCD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Futaba T6J - 2.4GHz Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info