Bedienungsanleitung Fuxtec FX-KSP250 (Seite 31 von 99) (Deutsch, Englisch, Französisch, Italienisch)

781774

Zoom out

Zoom in

Vorherige Seite

1/99

Nächste Seite

Original manual for petrol chainsaw FX-KSP series

− Have damaged parts replaced or re-

paired, ensuring that the correct specifi-

cation of spare parts is observed when

doing so.

◼ Before commencing work, familiarise

yourself in detail with how to operate

the chainsaw.

Noise and vibration

NOTE

Values for noise levels and total vibrations can

be gleaned from the "Technical data" table.

CAUTION!

The indicated measurements refer to new

power tools. Daily use causes the noise and

vibration values to change.

NOTE

The vibration level specified in these instruc-

tions was measured in accordance with a

standard test procedure that meets the re-

quirements of EN 60745.

If the chainsaw is not maintained properly, the

vibration level could be affected during opera-

tion. This may significantly increase the vibra-

tion load over the total working period.

To estimate the vibration load more accu-

rately, the times should also be taken account

of during which the equipment is switched off.

This may significantly decrease the vibration

load over the total working period.

CAUTION!

Wear ear defenders at a sound pressure

above 85 dB(A).

Information about noise develop-

ment

CAUTION!

The actual vibration emissions value during

operation of the machine may deviate from

that specified in the operating instructions or

by the manufacturer. This could be influ-

enced by the following factors, which should

be taken account of before and during use:

− Is the chainsaw being used correctly?

− Is the procedure during processing and

cutting of the wood correct and appro-

priate?

− Is the machine in a good state of repair, is

the sharpness of the cutting tool OK and

is the correct cutting tool being used?

− Are the handles or, if necessary, op-

tional vibration damping handles fitted

and are these firmly attached to the ma-

chine body?

NOTE

There may be national regulations (environ-

mental, occupational safety) that restrict use

of the chainsaw.

This is loud equipment and the noise cannot

be avoided. For longer periods of operation,

make sure that it is used during authorised

and dedicated times. Respect quiet periods

where required and do not make more noise

than necessary. Ensure, for personal safety,

that hearing protection is worn by the opera-

tor and persons in the vicinity.

◼ All of the aforementioned precautions are

not enough to prevent vibration white fin-

ger or carpal tunnel syndrome.

◼ Keep an eye on the condition of your

hands and fingers if you are a frequent or

regular user.

◼ If you experience any unpleasant feeling in

your hands or skin discolouration during

use of the machine, stop work immedi-

ately. Seek medical assistance without de-

lay in the event of one of the above symp-

toms.

◼ Take a sufficient number of breaks from

work. Failure to take sufficient breaks from

work can cause hand-arm vibration syn-

drome.

◼ Depending on the workload, therefore, es-

timate the degree of exposure from chain-

saw use. Reduce the risk of being ex-

posed to vibrations in doing so.

◼ Make a work plan. The vibration load can

be reduced in this way.

◼ Minimise use of the chain saw at tempera-

tures below 10°C.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fuxtec FX-KSP250 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info