781774
46
Zoom out
Zoom in
Vorherige Seite
1/99
Nächste Seite
Original manual for petrol chainsaw FX-KSP series
The guide groove must be perpendicular for
operationally safe and smooth running of the
saw chain.
Rotate the guide rail at regular intervals to
avoid one-sided wear.
1
Ruler
2
Gap
3
No gap
4
Chain runs properly in chain groove
low risk!
5
Increased risk of accident!
Chain runs at an angle in chain groove
Checking the guide rail
Place a ruler against the guide rail and the
outside of a saw tooth.
If there is a gap between the guide rail
and the ruler, the guide groove is in
good order
If there is no gap, the guide groove is
worn.
If the guide groove is worn, turn the guide
rail around or renew it.
Further notes
CAUTION!
Clean the chainsaw after every operation. Neg-
ligence regarding the cleaning measures may
lead to material damage and malfunctions.
Do not spray the chainsaw with water.
Keep the vent slots clean and free of dust.
Clean the saw chain and guide rail after
every use.
For external cleaning, use a soft cloth and
a soft brush.
Clean the tank cap seals regularly and re-
place if necessary.
Storage
Store the equipment in a dry and frost-pro-
tected location (1C 2C).
Fit the transit cover on the saw chain.
Keep all plastic parts away from brake
fluid, petrol, products containing mineral
oil, penetrating oil etc.
These contain substances that can dam-
age or destroy the plastic parts.
Fertilizers and other garden chemicals
contain substances that have a strong cor-
rosive effect on metal parts. Therefore, do
not store the chainsaw near substances of
this kind.
Only store the chainsaw with the fuel tank
and oil tank empty.
Transport
CAUTION!
Risk of injury!
If transporting and changing location during
work, always switch off the chainsaw!
For short distances:
WARNING!
Acute risk of accident!
Under no circumstances should the chainsaw
be transported while the chain is running!
Fit the transit cover.
Activate the chain brake.
Carry the chainsaw by the front handle with
the guide rail pointing towards the rear.
For transport with a vehicle:
Allow the chainsaw to cool down before
any transportation.
Activate the chain brake.
Fit the transit cover.
Always secure the chainsaw to prevent it
from falling down or slipping.
Only transport the chainsaw with the fuel
tank and oil tank empty.
46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fuxtec FX-KSP250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info