Original-Bedienungsanleitung FUXTEC Laubbläser/-sauger FX-LB126/LBS126_de_en_fr_ita_rev07
34
31. Commissioning - refuelling, 2-stroke engine oil
The device is not delivered filled with fuel mixture.
Fill the device as described in this chapter under "Refuelling".
The device is operated with a 50:1 mixture of normal fuel (unleaded) and two-stroke
engine oil.
When handling petrol, increased attention is required. Avoid smoking and naked
flames at all costs because of the danger of explosion.
Gasoline:
Octane number at least 91 RON, lead-free
• Do not fill with leaded fuel, diesel or other non-approved fuels.
• Do not use fuel with an octane number lower than 91 RON. This can lead to engine damage
due to increased engine temperatures.
• If you work continuously in the higher speed range, use fuel with a higher octane rating.
• For environmental reasons, the use of unleaded petrol is recommended. The use of E10
fuels is not permitted.
2-stroke engine oil
Do not use four-stroke or two-stroke oils for water-cooled outboard engines, or
ready-mixed fuel from petrol stations.
Mixing ratio 50:1
• Ensure that the oil quantity is measured exactly, as a small deviation in the oil quantity has a
strong effect on the mixing ratio for small quantities.
• Do not change the mixing ratio, as this will result in increased combustion residues,
increased fuel consumption and reduced performance, or damage to the engine.
Mix the fuel and oil in a clean, petrol-approved and marked container with overfill protection.
1. First fill in half of the fuel to be mixed
2. Then fill in the entire quantity of oil.
