Original Bedienungsanleitung FUXTEC FX-PS152 / FX-PS162_de_en_fr_ita_rev06
43
Installation of the lawn trimmer (thread spool)
Step one:
Insert the key (1) into the hole in the gearhead so that the gear shaft is locked. Unscrew
and remove the nut. Since it is a safety nut, please make sure that there is a left-hand
thread here.
Step 2:
mount the lower spacer (here point 2, the same washer as above when mounting the knife
2) and install the thread spool on the gear shaft. The remaining accessories, such as the
upper spacer washer/washer or the silver ring, are not required for mounting the thread
spool! Then tighten it by hand.
Warning!
Ensure that all components are correctly assembled and installed and that all screws are
tightened.
FUEL AND 2-STROKE OIL
Use unleaded gasoline with 2-stroke engine oil in a 40:1 ratio. During the first few
operations, a mixture ratio of 25:1 can be selected to initially lubricate all device parts
optimally.
WARNING: Never use pure gasoline in your engine. This will cause permanent engine
damage and voids the manufacturer's warranty for this product. Never use a fuel mixture
that has been stored for more than 90 days.
WARNING: This must be a premium oil for 2-stroke air-cooled engines. We recommend
the original FUXTEC 2T-oil "Made in Germany."
FUEL MIXTURE
Mix fuel with 2-stroke oil in a container provided for this purpose. Note the following
