Original Bedienungsanleitung FUXTEC Universalstreuer FX-US270_de_en_fr_ita_rev5
8
Working with the hand spreader
1. Place the spreader on a flat surface with a firm base
2. Fill the container with the grit
3. Select the spreading capacity (Pic.7)
4. Select the motor speed to be set (Pic.5)
5. Press the on/off switch and at the same time press the starter of the spreading wheel
(pic.8)
6. This opens the spreading material feeder (fig.6), and the spreading wheel starts to rotate.
7. Start with a low spreading capacity and gradually adjust it to the area to be worked.
During use, hold the spreader in one hand slightly to the side in front of your body. It is not
necessary to move the spreader back and forth (pic.9).
Move at an appropriate speed adapted to the spreading area.
Maintenance / Care
After use, clean the spreader with a diluted soap solution and a damp cloth. Do not
permanently expose the spreader to a cleaning liquid.
Technical data:
Model FX-US270
Volt 6V DC
Batteries 4xAA
Motor speed 12000min-1
No Load Speed 1200-1800min-1
Container capacity 2.7L
