Bedienungsanleitung Fysic FPO 10 (Seite 2 von 2) (Englisch)

644210

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Screen 1

- Sounds Setup To go to the other menu

- SpO2 Alm Hi Set hi levels of oxygen

percentage

- SpO2 Alm Lo Set low levels of oxygen

percentage

- PR Alm Hi Set high levels of pulse

rate

- PR Alm Lo Set low levels of pulse rate

- +/- Switch between going

higher or lower

- Exit To exit the menu

Screen 2

- Alm Setup To go to the other menu

- Alm To switch the alarm on or

off

- Beep To switch the pulse rate

alarm on or off

- Restore To restore back to factory

settings

- Exit To exit the menu

Maintenance:

Cleaning and storage:

• Clean the black rubber nger sleeve before

and after using with medicinal alcohol (>

95%).

• The exterior part of the tester can be cleaned

using a damp cloth. The FPO-10 is not water-

proof, so DO NOT immerse in water.

• Keep the pulse Oximeter out of the reach of

children, and preferably inside the included

case in a dry place.

• See the technical specications regarding

storage conditions.

Batteries:

• The batteries can power the unit for 24 hours

continuously.

• If the device will not be used for a long period

(> 2 months), remove the batteries. Doing so

prevent any possible damage from leaking

batteries.

• Replace the batteries when the battery indica-

tor shows that the batteries are running low.

• Always place two identical batteries, type

alkaline, size AAA.

• Rechargeable batteries should not be used

due to their lower voltage.

Environment:

• Should the device need to be discarded, hand

it over to your supplier. They will dispose of it

in an environmentally friendly manner.

• Empty batteries can be returned to the sup-

plier or disposed of in an environmentally-

friendly manner according to your local regu-

lations. Do not dispose of used batteries with

your normal household waste.

Technical:

Calibration:

• The FPO-10 does not need to be calibrated.

Specications:

• Display: Colour, type OLED

• Pulse rate:

Range: 25bpm ~ 250bpm

Resolution: 1bpm

Accuracy: 2bpm

Strength: bar chart

(bpm = beats per minute)

• SpO2:

Range: 0% -100%

Resolution: 1%

Accuracy: 70% -100%: ± 2%

0% -69%: unspecied

• Batteries: 2x AAA, 1.5V, Alkaline

Consumption: 30mA (nominal)

Battery life: 24 hours continuous use

• Dimensions, weight:

64 x 35 x 34mm / 65 grams (incl. batt)

• Surroundings:

Operating temperature: 5°C ~ 40°C

Storage temperature: -10°C ~ 50°C

Operating humidity: 15% ~ 80%

Storage Humidity: 10% ~ 93%

Declaration of Conformity:

• The FPO-10 conforms to the EMC standard

IEC60601-1-2.

• The materials of the FPO-10 for which the

user will touch complies with the standards

ISO 10993-1, -5 and -10 (does not contain

dangerous toxins and causes no reaction to

skin tissues).

Service:

• 24 months Warranty ● FPO-10 does not con-

tain any service components/accessories ●

maintenance only through the service depart-

ment of Fysic.

: Wellkang Ltd, Suite B, 29 Harley Street,

London, W1G9QR, U.K.

: Shenzhen Jumper Medical Equipment Co.,

Limited, 5th Floor Building No. 34, Baoyuan

Industrial Zone, Xixiang Street, Baoan District,

Shenzhen 518102, P.R. China ● Public E-mail:

info@jumper-medical.com ● Tel: +86-755-

26692192, 26696279 ● Fax: +86-755-26852025

v1.00482

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fysic FPO 10 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Fysic FPO 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info