T
T
1. press the button
2. use the and buttons to search for the
desired last dialled number
3. press and hold the button for 3 seconds
4. press the OK button
Handset:
1. press the button
2. use the and buttons to search for the
desired last dialled number
3. press 2x the OK button, add the name and
press 2x the OK button again
T
T
1. press the button
2. use and to search for the desired number
3. briey button
4. press the OK button
Handset:
1. press the button
2. use and to search for the desired number
3. press the OK button and use and to
select DELETE (to only delete the selected
number) or DELETE
4. press
[ REGISTRA
This function is explained in detail in chapter 8.1.
[ DEREGISTER ]
Use this option to deregister lost or faulty hand-
sets.
[ RESET ]
If you’ve lost the overview with regards to the set-
tings or you’ve lost or forgotten the PIN code, you
may use this option to restore the default factory
settings. Keep in mind that not only the settings
are reset to the default values, also the PIN code
will be 0000
last dialled number memory will be empty
phonebook memory will not be deleted.
[ RECALL
Use this option to set the interruption duration of
the R/FLASH pulse
(270mS) or LONG
Refer to the
switchboard or ask your telephone provider for the
desired recall time.
100mS is the standardised recall time in the Ben-
elux, this time is already set in the factory
7.3 Clock
1. press the MENU button on the handset
2. use and to scroll to [ CLOCK&ALARM ]
3. use the OK button
4. now use and to select one of the follow-
ing settings and press OK
[ DA
and time are transferred to the telephone)
[ SET FORMA
24 hours format and to set the time display to day/
month or month/day (this setting is separate for the
handset)
[ -
mine whether the alarm must be activated once or
daily
melody
8 MUL
8.1 T
Y
the FX-5555. Register new handsets as follows:
telephone:
1. press and hold the INT button on the tele-
phone for 5 seconds
new handset:
1. open the menu and select the option [ SET-
TINGS ]
2. press the OK button and select the option
[ REGISTRA
3. press the OK button and use the keypad to
enter the PIN code (the default factory code
0000 or your
4. press the OK button; the handset will now start
searching for the base
After several seconds, the handset will have
located the base and the right part of the
display will show the handset number
8.2 T
Handsets that are lost or no longer function must
be deregistered.
T
the [ SETTINGS ] menu.
9 DISPLA
9.1 Handset
remains lit while within range of the
telephone; off when out of range of the
telephone
ashes when you’ve received new
calls; this symbol turns off after reading
the Caller-ID memory of that handset
illuminates while reading the Caller-ID
memory
illuminates while reading the last dialled
number memory
ashes during an incoming call; re-
mains lit during a phone conversation
illuminates when the speaker function is
enabled
illuminates when the ringtone of the
handset is disabled
ashes when you’ve received a new
voice-mail message
battery indication:
: battery is full
: battery only 2/3 full
: battery only 1/3 full, recharging is
recommended
: battery nearly empty
may switch off at any moment
illuminates when you use the /
buttons to show additional options or
memories in the display
illuminates when the number is too long
to be shown in the display
button to view the rest of the number
9.2 T
illuminates during a phone conversation
ashes when you’ve
this symbol will turn off after reading the
Caller-ID memory of the telephone
illuminates while using the memory
illuminates when the ringtone of the
telephone is disabled
ashes when you’ve
voice-mail message
10 SPECIFICA
Protocol: DECT
GAP
Caller-ID: DTMF & FSK,
auto selection
20 memories
Dialling: TONE
FLASH: 100, 270 &
Memories: T
Handset: 50
T Power adaptor
6VDC, 500mA
Handset power supply: 2x 1.2V 400mAh
NiMH battery
size AAA
Charger power supply: Power adaptor
6VDC, 150mA
Range: 50m indoors
300m outdoors
Handset operation time (with full batteries):
stand-by: >
in use:
Connection factor: ETSI 50
Operation temperature: 0°C to 40°C
Storage temperature: -20°C to 60°C
6 CALLER-ID
Provided that your telephone provider supports
Caller-ID, the number of the caller will appear in
the display of your telephone and handset. The
handset will also show the name if this name is
saved in the memory of the handset.
The telephone and handset each have their own
memory for 20
memories must be read and deleted separately
New call indication:
If you’ve missed a call, the
symbol will
on the telephone. On the handset the symbol
will be ashing
T
Press the button and use the and buttons
to scroll the memory
programmed in the memory of the handset, the
name will be displayed. If not, only the number is
displayed. The telephone only shows the tele-
phone numbers.
Next to the name or number
the call are also shown in the display
T
1. press the button and use the and but-
tons to search for the desired call
2. pick up the receiver or press the button to
dial the selected number again
In case you’ve set a strange language and no
longer know how to restore the English language,
perform the following:
1. press 3x the End button
2. press 1x the MENU button
3. press 1x the button
4. press 1x the OK button
5. press 2x the button
6. press 1x the OK button
7. use the / buttons to select the English
language and press
this language
8. press 1x the End button
7.2 System settings:
Open the menu as follows:
1. press the MENU button on the handset
2. use and to scroll to [ SETTINGS ]
3. press the OK button
4. now use and to scroll to the desired set-
ting and press OK
[ CHANGE PIN ]
Y-
tering additional handsets and for certain settings.
The default factory
use this menu option to change this code into a
personal code.
See the item [ RESET ] if you’ve lost your PIN
code.
7 SETUP
7.1 handset settings:
Open the menu as follows:
1. press the MENU button on the handset
2. use and to scroll to [ HANDSET OPTS ]
3. press the OK button
4. now use and to scroll to the desired set-
ting and press OK
[ HANDSET NAME ]
Y
When the handset is set to stand-by
can be shown in the display of the handset.
[ RINGER&TONES ]
Use this option to set the ringtone and call volume
and whether a key tone must be emitted each time
you press one of the buttons.
[ LANGUAGE ]
The various instructions in the display can be
shown in different languages. Use this option to set
the desired language.
v1.0
