Bedienungsanleitung Gaggenau AC270101 (Seite 39 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

761914

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Installation instructions en

▶Never pull on the power cord to unplug the

appliance. Always unplug the appliance at

the mains.

▶If the appliance or the power cord is dam-

aged, immediately unplug the power cord

or switch off the fuse in the fuse box.

▶Call customer services. →Page36

Incorrect repairs are dangerous.

▶Repairs to the appliance should only be

carried out by trained specialist staff.

▶Only use genuine spare parts when repair-

ing the appliance.

▶If the power cord of this appliance is dam-

aged, it must be replaced by trained spe-

cialist staff.

Improper installation is dangerous.

▶Connect and operate the appliance only in

accordance with the specifications on the

rating plate.

▶Connect the appliance to a power supply

with alternating current only via a properly

installed socket with earthing.

▶The protective conductor system of the do-

mestic electrical installation must be prop-

erly installed.

▶Never equip the appliance with an external

switching device, e.g. a timer or remote

control.

▶When the appliance is installed, the mains

plug of the power cord must be freely ac-

cessible. If free access is not possible, an

all-pole isolating switch must be installed in

the permanent electrical installation accord-

ing to the conditions of Overvoltage Cat-

egory III and according to the installation

regulations.

▶When installing the appliance, check that

the power cable is not trapped or dam-

aged.

ATTENTION!

There is a risk of damage to the appliance if

the cable is coiled up.

▶Always secure the cable firmly using the

strain relief so that it does not coil up fully

in the appliance.

15.5 Information on the installation situation

¡Install this appliance on the kitchen ceiling or a sta-

ble suspended ceiling.

¡To install additional special accessory parts, obser-

ve the enclosed installation instructions.

¡Recommended ceiling height up to 3.50m.

¡The appliance finds it more difficult to draw in the

cooking vapours the further away they are from the

hotplate. For optimum performance, a maximum di-

stance of 1500mm is recommended.

¡The width of the extractor hood must correspond at

least with the width of the hob.

¡To optimally detect the cooking vapours, install the

appliance in the middle of the hob.

¡When securing cables, ensure that the maximum di-

stance between the frame cover and the top edge

of the appliance is 1.20 m.

15.6 Instructions for the electrical

connection

In order to safely connect the appliance to the elec-

trical system, follow these instructions.

WARNING‒Risk of electric shock!

It must always be possible to disconnect the appliance

from the electricity supply. The appliance must only be

connected to a protective contact socket that has been

correctly installed.

▶The mains plug for the mains power cable must be

easily accessible after the appliance is installed.

▶If this is not possible, an all-pole isolating switch

must be integrated into the permanent electrical in-

stallation according to the conditions of overvoltage

category III and according to the installation regula-

tions.

▶The permanent electrical installation must only be

wired by a professional electrician. We recommend

installing a residual-current circuit breaker (RCCB)

in the appliance's power supply circuit.

Sharp-edged components inside the appliance may

damage the connecting cable.

▶Do not kink or trap the connecting cable.

¡The connection data can be found on the rating pla-

te. →Seite36

¡The connecting cable is approx.1.30m long.

¡This appliance complies with the EC interference

suppression regulations.

¡The appliance corresponds to protection class 1.

You should therefore only use the appliance with a

protective earth connection.

¡Do not connect the appliance to the power supply

during installation.

¡Ensure that the protection against contact is guaran-

teed during installation.

¡Only a licensed professional may connect applian-

ces without plugs. They are subject to the require-

ments of the local electricity provider.

15.7 General information

Follow these general instructions during the installation.

¡For the installation, observe the currently valid buil-

ding regulations and the regulations of the local

electricity and gas suppliers.

¡When discharging the exhaust air, the official and le-

gal regulations, such as the regional building code.,

must be observed.

¡In order to freely access the appliance for servicing,

select an easy-to-reach installation site.

¡The surfaces of the appliance are sensitive. Avoid

damaging them during installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau AC270101 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info