Bedienungsanleitung Gaggenau AI442100 (Seite 9 von 48) (Englisch, Portugiesisch, Spanisch)

760917

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Intensive setting

You can use the intensive setting if there is a large build-

up of odours and fumes/vapours.

Switching on

1Press the # button.

The fan starts at setting 2.

2Press the Ž button.

Intensive mode is activated.

Note: Intensive mode runs for six minutes. Once

this time has elapsed, the appliance switches back

to the previously selected fan setting.

Switching off

Press the # button or the button for another fan

setting.

Intensive mode is deactivated.

Automatic mode

Switching on

1Press the # button.

The fan starts in fan setting 2.

2Press the < button.

The optimum fan setting 1, 2 or 3 is set

automatically by a sensor.

Switching off

Press the < or # button.

Automatic mode is switched off.

The fan switches off automatically if the air quality in the

room exceeds a certain level. Automatic mode can run

for a maximum of four hours.

Sensor control

In automatic mode, a sensor in the extractor hood

detects the intensity of the cooking and roasting fumes.

Depending on the setting of the sensor, the fan

automatically switches to another fan speed.

Default sensitivity setting: 2

Lowest sensitivity setting: 1

Highest sensitivity setting: 4

Changing the sensitivity of the sensor

If the sensor control reacts too quickly or too slowly,

change the sensitivity setting.

1When the fan is switched off, press and hold the <

button for approx. 4 seconds.

The setting is displayed.

2Press button 1, 2, 3 or the Ž button to change the

sensitivity setting.

3Press and hold the < button for approx.

4 seconds.

The change is saved.

Saturation display

If the metal grease filters are saturated, the œ button

flashes.

If you have not yet done so, the metal grease filters

should be cleaned now.

For instructions on how to clean the metal grease filters,

please refer to the Cleaning and maintenance section.

Resetting the saturation indicator

Press the œ button.

Lighting

The lighting can be switched on and off independently

of the ventilation system.

Switching on or off

Press the ž button.

Setting the brightness

Press and hold the ž button until the desired

brightness is reached.

Safety shut-off

For your safety, the appliance has a safety shut-off

function. The lighting switches off after 12 hours and

the fan after 4 hours if the appliance is not operated

during this time.

Button 1 = Sensitivity 1

Button 2 = Sensitivity 2

Button 3 = Sensitivity 3

Ž button = Sensitivity 4

Cleaning and maintenance

mRisk of burns!

The appliance becomes hot during operation. Allow the

appliance to cool down before cleaning.

mRisk of electric shock!

Penetrating moisture may result in an electric shock.

Clean the appliance using a damp cloth only. Before

cleaning, pull out the mains plug or switch off the circuit

breaker in the fuse box.

mRisk of electric shock!

Do not use any high-pressure cleaners or steam

cleaners, which can result in an electric shock.

mRisk of injury!

Components inside the appliance may have sharp

edges. Wear protective gloves.

Cleaning agents

Observe the information in the table to ensure that the

different surfaces are not damaged by using the wrong

type of cleaning agent. Do not use

▯harsh or abrasive cleaning agents,

▯cleaning agents with a high concentration of

alcohol,

▯hard scouring pads or sponges,

▯high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Follow all instructions and warnings included with the

cleaning agents.

Degreaser (product no. 00311297)

Intensive degreaser for effectively removing grease

deposits in the extractor hood. Ideal for pre-treating

metal grease filters.

Stainless steel care cloths (product no. 00311134)

Used to care for stainless steel surfaces. Impregnated

with special oil to prevent the accumulation of dirt and

fingerprints.

Area Cleaning agents

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth.

Clean stainless steel surfaces in the

direction of the grain only.

Special stainless steel cleaning prod-

ucts are available from our after-sales

service or from specialist retailers.

Apply a very thin layer of the cleaning

product with a soft cloth.

Aluminium and

plastic

Glass cleaner:

Clean with a soft cloth.

Glass Glass cleaner:

Clean with a soft cloth. Do not use a

glass scraper.

Operating controls Hot soapy water:

Clean using a damp dish cloth and dry

with a soft cloth.

Risk of damage to the electronics from

penetrating moisture. Never clean oper-

ator controls with a wet cloth.

Do not use any stainless steel cleaners.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau AI442100 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau AI442100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info