Bedienungsanleitung Gaggenau AL200190 (Seite 7 von 24) (Englisch)

760903

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Basic operation en

7.4 Switching on intensive mode

If particularly strong odours or vapours develop, you

can use intensive mode.

Note:Intensive mode 1 can be set in the HomeCon-

nect app.

▶Press repeatedly until LED5 lights up in the LED

display for intensive mode2.

aAfter approx. 6 minutes, the appliance automatically

switches to fan setting 3.

7.5 Switching off intensive mode

▶To select a fan setting of your choice, press ⁠.

7.6 Switching on the fan run-on

During the fan run-on, the appliance continues to run

for a short time and then switches off automatically.

Note:Further settings are available in the HomeCon-

nectapp.

Requirement:The appliance is switched on.

▶Press ⁠.

aThe fan run-on starts at fan setting1.

aThe Ambient Light remains switched on for ap-

prox.10minutes.

aThe glass panel remains extended halfway.

aThe appliance switches off automatically after ap-

prox. 10 minutes.

aThe glass panel moves downwards and the appli-

ance closes.

7.7 Switching on automatic mode1

The optimum fan setting is set automatically using a

sensor.

▶Press ⁠.

Note:In automatic mode, the Guided Air function is al-

ways switched on.

7.8 Switching off automatic mode1

▶Press ⁠.

aThe appliance starts at fan setting2.

aThe ventilation is automatically ended when the

sensor detects no further change in the room air

quality.

aAutomatic mode runs for a maximum of four hours.

Note:Further settings are available in the HomeCon-

nectapp.

7.9 Intermittent ventilation

With interval ventilation, the ventilation system switches

on and off in the selected setting for the selected time.

Note:This function is only available in the HomeCon-

nectapp.

If the interval ventilation is switched on, LED1 flashes.

7.10 Sensor control1

In automatic mode, a sensor in the appliance detects

the intensity of the cooking and roasting fumes. De-

pending on the setting of the sensor sensitivity, the op-

timum fan setting is automatically switched on.

If the sensor control system reacts too weakly or too

strongly, the setting for the sensor sensitivity may

change.

¡Default setting: Fan setting3

¡Lowest setting: Fan setting1

¡Highest setting: Fan setting5

7.11 Setting the sensor control1

Requirement:The appliance is switched on.

1. Press and hold and for approx.three seconds.

2. Press or to change the setting.

3. Press to save the setting.

Or wait approx. fiveseconds until the setting is

saved automatically.

aA signal tone sounds as soon as the selected set-

ting is saved.

7.12 Setting the saturation indicator

The saturation indicator must be adjusted depending

on the filter used.

Requirement:The appliance is switched on.

1. Press and hold and for approx. 3 seconds.

‒To set circulating-air mode (Clean Air Standard

circulating-air set or Clean Air Plus circulating-air

set), press and hold ⁠/ until LED2 lights up in

the LED display.

‒To set circulating-air mode (regenerable filter),

press ⁠/ until LED3 lights up in the LED dis-

play.

‒To convert the electronic control back to opera-

tion without the air recirculation filter, press ⁠/

until LED1 lights up on the LED display.

2. Press to save the setting.

Or wait approx. fiveseconds until the setting is

saved automatically.

aA signal tone sounds as soon as the selected set-

ting is saved.

7.13 Resetting the saturation indicator

After cleaning the grease filter or after changing the

odour filter, the saturation indicator can be reset.

Requirements

¡After switching off the appliance, the upper two LEDs

for the grease filter's saturation indicator and/or the

lower two LEDs for the odour filter's saturation indic-

ator flash in the left hand control panel.

¡A signal sounds repeatedly.

▶Press .

aThe saturation indicator is reset.

1Depending on the appliance specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau AL200190 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau AL200190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info