Bedienungsanleitung Gaggenau AW442120 (Seite 11 von 48) (Englisch, Portugiesisch, Spanisch)

760920

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Removing metal grease filter

mRisk of injury!

The metal grease filters and components inside the

appliance may have sharp edges. Wear protective

gloves.

mRisk of injury!

The metal grease filters are very heavy. Remove the

metal grease filters carefully and secure them against

falling down when doing so.

The metal grease filter consists of three components.

You can take the metal grease filters apart to facilitate

cleaning.

1Open the lock and fold the metal grease filter

downwards. For safety reasons, the metal grease

filter is locked in place at the rear edge.

2Slightly lift the front edge of the metal grease filter

until it can be removed from the holder.

Note: Grease may accumulate in the bottom of the

metal grease filter. Hold the metal grease filter level

to prevent fat from dripping out.

3Remove the metal mesh filter.

4Pull the two parts of the filter apart, using the

recessed grip to help you do this.

5Clean the metal grease filter.

6Clean the appliance from the inside.

Cleaning the metal mesh grease

filters

mRisk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months.

Never operate the appliance without the grease filter.

Notes

‒Do not use any aggressive, acidic or alkaline

cleaning agents.

‒When cleaning the metal mesh grease filters, also

clean the holder for the metal mesh grease filters in

the appliance using a damp cloth.

‒The metal mesh grease filters can be cleaned in the

dishwasher or by hand.

In the dishwasher:

Note: Slight discolouration may occur if the metal

grease filters are cleaned in the dishwasher. This has no

effect on the function of the metal grease filters.

▯Do not clean heavily soiled metal grease filters

together with utensils.

▯Remove any heavy soiling first by hand.

▯Place the metal grease filters in the dishwasher

leaving plenty of space around them. The metal

grease filters must not be wedged in.

By hand:

▯Soak the metal grease filters in hot soapy water.

▯Clean the filters with a brush and then rinse them

thoroughly.

▯Leave the metal grease filters to drain.

Note: You can use a special degreaser to remove

stubborn dirt. This can be ordered via the online shop

(product no. 00311297). Spray the dirty metal grease

filters with the degreaser and leave it to work for up to

five minutes. Then rinse thoroughly. Observe the

instructions for use supplied with the cleaning product.

Installing the metal mesh grease filter

1Push the two parts of the filter back together.

Ensure that the opening on the edge is in the

correct place.

2Push the metal mesh filter in completely.

3With the lock facing towards the front, place the

metal grease filter in the underside of the appliance

and engage the lock.

Note: When pushing the filter in, make sure the

lock engages. Otherwise, the metal grease filter

can fall and damage the cooktop.

4Press the œ button.

The saturation indicator is reset.

Changing the activated charcoal filter

(only in circulating-air mode)

mRisk of injury!

Risk of falling while changing filter. Use a stable

stepladder.

To guarantee the degree of odour removal, you must

change the activated charcoal filter regularly.

In the case of limited or occasional use: Change the

activated charcoal filter after 18 months at the latest or

if odours are present in the emergent air.

In the case of daily or heavy use: Change the activated

charcoal filter after 12 months at the latest or if odours

are present in the emergent air.

Notes

‒The activated charcoal filters are included in the

scope of supply for the AA 442 810 recirculating-air

set. Additional activated charcoal filters can be

obtained through specialist retailers, after-sales

service, or the online shop using the part number

AA 442 110 (pack of two filters).

‒Always change both activated charcoal filters.

‒The activated charcoal filters cannot be cleaned or

activated again.

‒Dispose of used active charcoal filters with your

household waste.

Proceed as follows:

1Open the lock on both protective grids and remove

the protective grids.

2Remove the old activated charcoal filter.

3Insert the new activated charcoal filters.

4Insert the protective grids.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau AW442120 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau AW442120

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info