Bedienungsanleitung Gaggenau BMP250110 (Seite 12 von 44) (Englisch)

512123

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

The maximum setting is for heating liquids. After a

certain period, the microwave's power output is reduced

to below maximum to protect the appliance.After a

cooling period, the microwave's full power will be

available once more.

Setting the microwave

1 Use the function selector to set the required

microwave power.

2 Use the rotary selector to set the cooking time.

3 Touch I to start.

The operation begins. You can see the cooking time

counting down.

An audible signal sounds once the cooking time has

elapsed. The signal stops prematurely if you touch the

™ symbol, open the appliance door or set the function

selector to 0. The microwave operation has finished.

If you open the oven door during this time, the

microwave operation is suspended. After closing the

door, touch the I symbol. The operation continues.

You can use the rotary selector to change the cooking

time at any time.

You can use the function selector to change the power

at any time. Restart by pressing I.

You can call up the cooking time that has already

elapsed by pressing the ( symbol. Press the ™ symbol

to return to the standard display.

Pause:

You can touch H to suspend the operation. Touch I to

continue the operation.

Switching off:

To cancel the operation and delete the settings, turn the

function selector to 0.

Note: It is normal for the fan to continue running, even

when the door is open.

Oven

In oven mode, you can select from the following types of

heating:

Setting the heating type and

temperature

1 Use the function selector to set the required

heating type, e.g. hot air.

The display shows the symbol for hot air H and the

default temperature 180 °C.

2 Use the rotary selector to set the temperature.

Note: If you want, you can now set the cooking time

for your food and delay the cooking time end to a

later time. Touch the h symbol; the sequential

operation menu appears. Touch C to select and set

the "Cooking time" 6 function. Touch C to select

and set the "Cooking time end" 5 function.

More detailed information on this is described in

the section Sequential operation.

3 Touch I to start.

The display shows the heat-up symbol “ (only from a

set oven temperature of 100 °C). The bar continuously

displays the heating status. When the set temperature

has been reached, a signal sounds and the “ heat-up

symbol goes out.

If the "Rapid heating" function is activated, the symbol

for "Rapid heating" ’ appears.

Note: You can activate and deactivate a heat-up signal

in the basic settings. The signal sounds once the

required temperature is reached.





Type of heating Temperature Use

H Hot air 40 °C Proving yeast dough,

defrosting cream cakes

100-250 °C Baking cakes, small

baked products and

pizza on the glass tray

R Full surface

grill + hot air

100-250 °C Roasting pieces of meat

Z Full surface

grill + circu-

lated air

100-250 °C For bakes, toppings and

whole poultry



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BMP250110 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BMP250110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info