Bedienungsanleitung Gaggenau BMP251100 (Seite 17 von 44) (Englisch)

512125

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Automatic programmes

The automatic programmes enable you to prepare food

very easily. You select the programme and enter the

weight of your food. The automatic programme makes

the optimum setting. You can select from 15

programmes.

Setting a programme

1 Use the function selector to set any operating

mode.

Note: The function selector must not be set to ž or

2 Touch the "chef's hat" i symbol and the automatic

programmes are displayed.

3 Touch ™ to confirm.

The first programme appears in the display.

4 Use the rotary selector to select the required

programme, e.g. Cook: "Fresh vegetables".

5 Use % to select the weight n function.

6 Use the rotary selector to set the weight.

7 Touch ™ to confirm.

8 Touch I to start.

The operation begins. You can see the cooking time

counting down.

An audible signal sounds once the cooking time has

elapsed. The signal stops prematurely if you touch the

™ symbol, open the appliance door or set the function

selector to 0. The programme has ended.

Standing time:

Some dishes must be left to stand after the programme

ends, in order to reach an even temperature or for

subsequent cooking. Wait until the standing time has

elapsed before removing the food from the oven.

Tips:

Touch * to receive tips on cookware, accessories and

shelf position. Touch ™ to exit this display.

Notes:

Touch ( to view notes for the preparation. The ) symbol

is displayed for important information and action

prompts. Touch ™ to exit this display.

For some dishes, during the preparation stage, the

display shows information about turning or stirring.

Follow this information. When you open the appliance

door, the operation stops. After the door is closed,

continue the operation by touching I . If you do not turn

or stir the food, the programme will continue on until its

end, as normal, anyway.

Pause:

You can touch H to suspend the operation. Touch I to

continue the operation.

Switching off:

To cancel the operation and delete the settings, turn the

function selector to 0.

Individual adjustment

If the cooking result of a programme does not meet

your expectations, you can make individual adjustments

before the programme starts. Enter the settings as

described in steps 1 to 4.

1 Use % to select the individual settings.

2 Use C to select the o "Cooking result" function.

3 Set the cooking result using the rotary selector.

Anti-clockwise = cooking result less well done.

Clockwise = cooking result more well done.

4 Confirm with ™.

The display switches to the programme. The

cooking time is changed accordingly.

$XWRPDWLFSURJUDPPHV

)UHVKYHJHWDEOHV

KNJ





PLQ

VHF



&RRNLQJUHVXOW



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BMP251100 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BMP251100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info