Bedienungsanleitung Gaggenau BOP210130 (Seite 13 von 48) (Englisch)

512304

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Before using the appliance for the first time

Before using the appliance for the

first time

Before using the appliance for the fi rst ti me

In this section, you can find out what you must do

before using your appliance to prepare food for the first

time. First read the section entitled ~ "Important

safety information" on page 5

The appliance must be fully installed and connected to

the mains.

After connecting the appliance to the power supply, the

"Initial settings "menu will be displayed. Now you can

now configure your new appliance for initial set-up.

Notes

– The "Initial settings" menu will appear only after the

appliance has been connected to a power supply

and switched on for the first time, or if the

appliance has not been connected to a power

supply for a number of days.

Once the appliance has been connected to a power

supply, the GAGGENAU logo will appear first for

approximately 30 seconds. The "Initial settings"

menu will then appear automatically.

– You can change the settings at any time in the basic

settings. ~

"Basic settings" on page 24

Setting the language

The preset language appears in the display.

1 Turn the rotary selector to select the required

display language.

2 Confirm with ™.

Setting the time format

The two possible formats 24h and AM/PM appear in the

display. The default is the 24h format.

1 Use the rotary selector to select the desired format.

2 Confirm with ™.

Setting the clock

The time is shown in the display.

1 Set the desired time using the rotary selector.

2 Confirm with ™.

Setting the date format

The three possible formats D.M.Y, D/M/Y and M/D/Y

appear in the display. The default is the D.M.Y format.

1 Use the rotary selector to select the desired format.

2 Confirm with ™.

Setting the date

The preset date appears in the display. The day setting

is already active.

1 Set the day using the rotary selector.

2 Touch the C symbol to switch to the month setting.

3 Set the month using the rotary selector.

4 Touch the C symbol to switch to the year setting.

5 Set the year using the rotary selector.

6 Confirm with ™.

Setting the temperature unit

The two possible units °C and °F will appear on the

display. The default unit is °C.

1 Use the rotary selector to select the unit you

require.

2 Confirm with ™.

Ending initial set-up

"Initial set-up complete" will appear on the display.

Confirm with ™.

The appliance will switch to standby mode and the

standby display will appear. The appliance is now ready

to use.

Heating up the oven

Make sure that there is no leftover packaging in the

cooking compartment.

To eliminate the new-appliance smell, heat up the oven

with it empty and the door closed. One hour with hot

air H at 200 °C is ideal for this.

Cleaning accessories

Before using the accessories for the first time, clean

them thoroughly using hot detergent solution and a soft

cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BOP210130 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BOP210130

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info