50
Power Cut
The appliance bridges a power cut of up to
5 minutes. The operation continues.
After a longer power cut the appliance will switch
off the operation. The
J symbol appears on the
display and three dashes instead of the
temperature.
Switch off the temperature knob and switch the
appliance back on.
The “first settings” menu reappears if the appliance
is without electricity for several days. You have to
set the clock and date.
Note: The basic settings remain stored even if the
appliance is without electricity for several days.
Exhibition Mode
If the x symbol appears on the standby screen,
exhibition mode is activated. The appliance does
not heat up.
Disconnect the appliance from the electricity for a
few seconds (switch off the household fuse or the
circuit breaker in the fuse box). Within 3 minutes
after reconnecting the appliance, go to the basic
settings menu and deactivate exhibition mode.
No Water Available
If the L symbol appears on the left top side of the
display and three dashes instead of the
temperature, there is no water available.
Check the water supply.
