Bedienungsanleitung Gaggenau BS470102 (Seite 15 von 60) (Englisch)

755817

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Water filter en

Setting the water hardness

"Water hardness" appears on the display.

Note: The water hardness display only appears if "Water

filter - Not available" is selected.

1Use the enclosed carbonate hardness test to check

the tap water: Fill the measurement tubing up to the

5ml fill mark with tap water.

2Add the indicator solution drop by drop until the

colour changes from purple to yellow.

Important: Count the drops and carefully turn the

measuring tubing after every single drop until the

solution is thoroughly mixed in. The number of

droplets corresponds to the water hardness.

3Using the rotary selector, set the measured water

hardness. The value 12is set by default.

4Press ™ to confirm.

Ending initial set-up

"Initial set-up complete" will appear on the display.

Confirm with ™.

The appliance will switch to standby mode and the

standby display will appear. The appliance is now ready

to use.

Cleaning the door panel

The door seal has been greased in the factory to make it

leaktight. There may be traces of grease left on the door

panel.

Clean the door panel with glass cleaner and a window

cloth or microfibre cloth before using the appliance for

the first time. Do not use glass scrapers.

Cleaning accessories

Before using the accessories for the first time, clean

them thoroughly using hot detergent solution and a soft

cloth.

Heating up the appliance

Make sure that there is no leftover packaging in the

cooking compartment.

To eliminate the new-appliance smell, heat up the empty

appliance with the door closed. One hour with hot air H

+ 60% humidity at 200 °C is ideal for this.

Water filter

Operation with or without a water

filter

You can use the appliance with or without a water filter.

If the water hardness exceeds 7°dH or carbonate

hardness 5°dH, we recommend the installation of the

descaling system GF 111 100.

Changing the water filter

Filter cartridges should be replaced regularly.

Replacement cartridges are available from after-sales

service or in the online shop (order number

GF 121 110).

The capacity of the filter cartridge depends on the

frequency of use of the appliance and your regional

water hardness. A message will appear in the display to

remind you when the filter needs to be replaced.

Regardless of the actual amount of water filtered the

filter cartridge needs to be changed after 12 months at

the latest.

1Set the function selector to S. Select "Water filter

change" using the rotary selector.

2The œ symbol is displayed. Confirm with ™.

3Change the water filter cartridge. Refer to the

instructions included with the filter cartridge.

Confirm with ™.

4"Water filter capacity" is shown in the display.

Confirm with ™.

5Turn the rotary selector to select the capacity of the

filter cartridge (between 100- 9000 litres). Confirm

with ™.

The water filter change is complete. Confirm with ™.

The appliance is now ready for operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BS470102 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BS470102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info