Bedienungsanleitung Gaggenau BSP220110 (Seite 29 von 40) (Englisch)

512148

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

en Trouble shooting

Power cut

Your appliance can bridge a power cut of a few

seconds. Operation continues.

If the power cut was for a longer period and the

appliance was in operation, a message appears in the

display. Operation is interrupted.

Set the function selector to 0, then the appliance can be

operated again as usual.

Demo mode

The ° symbol appears on the display when the

appliance is in demo mode. The appliance will not heat

up.

Briefly disconnect the appliance from the mains (switch

off the household fuse or the circuit breaker in the fuse

box). Then deactivate demo mode in the basic settings

within 3 minutes.

The appliance is not producing steam

properly

Limescale has formed in the appliance Start the descaling programme

The lighting is not working The lighting is defective Call the after-sales service

The cooling fan continues running after

the appliance is switched off.

The fan run-on removes moisture from

the appliance and protects the appli-

ance electronics. This may take up to

four hours.

This is normal

Error message "Exxx" If an error message is displayed, turn the

function selector to 0; if the display goes

out, there was a non-recurring problem.

If the error occurs repeatedly or the dis-

play remains on, please contact the

after-sales service and inform them of

the error code.

Water drips out when you open the

appliance door

The collecting channel on the underside

of the door panel is full

Dry the collecting channel with a

sponge

After-sales service en

After-sales service

After- sales service

Our after-sales service is there for you if your appliance

needs to be repaired. We will always find an appropriate

solution, also in order to avoid after-sales personnel

having to make unnecessary visits.

E number and FD number

When calling us, please give the full product number

(E no.) and the production number (FD no.) so that we

can provide you with the correct advice. The rating plate

bearing these numbers can be found when you open the

appliance door.

To save time, you can make a note of the number of your

appliance and the telephone number of the after-sales

service in the space below, should it be required.

Please note that a visit from an after-sales service

engineer is not free of charge, even during the warranty

period.

Please find the contact data of all countries in the

enclosed customer service list.

To book an engineer visit and product advice

Trust the expertise of the manufacturer, and rest

assured that the repair will be carried out by trained

service technicians using original spare parts for your

domestic appliance.

E no. FD no.

After-sales service O

GB 03448928988

Calls charged at local or mobile rate.

IE 014502655

0.03€ per minute at peak.

Off peak 0.0088€ per minute.

AU 1300368339

NZ 094770492

=1U)'(1U

7\SH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BSP220110 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP220110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info