Bedienungsanleitung Gaggenau BSP250100 (Seite 15 von 56) (Englisch)

512138

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Before using for the first time

Before using for the first time

Before using for the f i rst time

In this section, you can find out what you must do

before using your appliance to prepare food for the first

time. First read the section entitled ~ "Important

safety information" on page 5.

The appliance must be fully installed and connected to

the mains.

After connecting the appliance to the power supply, the

"Initial settings "menu will be displayed. Now you can

now configure your new appliance for initial set-up.

Notes

– The "Initial settings" menu will appear only after the

appliance has been connected to a power supply

and switched on for the first time, or if the

appliance has not been connected to a power

supply for a number of days.

Once the appliance has been connected to a power

supply, the GAGGENAU logo will appear first for

approximately 30seconds. The "Initial settings"

menu will then appear automatically.

– You can change the settings at any time in the basic

settings.

Setting the language

The preset language appears in the display.

1Turn the rotary selector to select the required

display language.

2Confirm with ™.

Setting the time format

The two possible formats 24h and AM/PM appear in the

display. The default is the 24h format.

1Use the rotary selector to select the desired format.

2Confirm with ™.

Setting the clock

The time is shown in the display.

1Set the desired time using the rotary selector.

2Confirm with ™.

Setting the date format

The three possible formats D.M.Y, D/M/Y and M/D/Y

appear in the display. The default is the D.M.Y format.

1Use the rotary selector to select the desired format.

2Confirm with ™.

Setting the date

The preset date appears in the display. The day setting

is already active.

1Set the day using the rotary selector.

2Touch the C symbol to switch to the month setting.

3Set the month using the rotary selector.

4Touch the C symbol to switch to the year setting.

5Set the year using the rotary selector.

6Confirm with ™.

Setting the temperature unit

The two possible units °C and °F will appear on the

display. The default unit is °C.

1Use the rotary selector to select the unit you

require.

2Confirm with ™.

Setting the water hardness

"Water hardness" appears in the display.

1Check the mains water with the included carbonate

hardness test: fill the small measurement tube with

mains water up to the 5 ml mark.

2Add drops of indicator solution until the color

changes from purple to yellow.

Important: count the drops and carefully swing the

measurement tube after every drop until the liquids

have mixed thoroughly. The number of drops

corresponds to the water hardness.

3Use the rotary selector to set the measured water

hardness. The value 12is set by default.

4Confirm with ™.

Ending initial set-up

"Initial set-up complete" will appear on the display.

Confirm with ™.

The appliance will switch to standby mode and the

standby display will appear. The appliance is now ready

to use.

Grease filter

Hook the enclosed grease filter onto the two bolts on

the back wall of the cooking compartment. Ensure that

you do not scratch the back wall when doing so.

Leave the grease filter in the cooking compartment for

all applications. Clean the grease filter with hot soapy

water or in the dishwasher every time heavy dirt

deposits have been left behind after cooking.

Activating the appliance en

Cleaning the door panel

The door seal has been greased in the factory to make it

leaktight. There may be traces of grease left on the door

panel.

Clean the door panel with glass cleaner and a window

cloth or microfibre cloth before using the appliance for

the first time. Do not use glass scrapers.

Cleaning accessories

Before using the accessories for the first time, clean

them thoroughly using hot detergent solution and a soft

cloth.

Heating up the appliance

Make sure that there is no leftover packaging in the

cooking compartment.

To eliminate the new-appliance smell, heat up the empty

appliance with the door closed. One hour with hot air H

+ 60% humidity at 200 °C is ideal for this.

9

Activating the appliance

Acti vating the appliance

Standby

The appliance switches to standby mode if no function

is set or the childproof lock is activated.

The brightness of the control panel is dimmed in

standby mode.

Notes

– Different displays can be shown in standby mode.

The default setting is the GAGGENAU logo and the

time. You can adjust the display using the "Standby

screen" setting in the basic settings. ~ "Basic

settings" on page 32

– The brightness of the display depends on the

vertical viewing angle. You can adjust the display

using the "Brightness" setting in the basic settings.

Activating the appliance

To exit standby mode, you can either

▯Turn the function selector,

▯Touch a control panel,

▯Open or close the door.

You can now set the desired function. You can read

about how to set functions in the respective chapters.

Notes

– When "Standby screen = off" is selected in the

basic settings, you must turn the function selector

to exit standby mode.

– The appliance returns to the standby screen if you

have not made any settings for a long time after

activation.

– When the door is open, the interior lighting

switches off after a short time.

Gaggenau BSP250100 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP250100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info