Bedienungsanleitung Gaggenau BSP251 (Seite 19 von 56) (Englisch)

512137

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Time-setting options

Safety shut-off

For your protection, the appliance is equipped with an

automatic safety shut-off. Any heating process is

switched off after 12 hours if the oven is not operated in

this time. A message appears in the display.

Exception:

The long-term timer has been programmed.

Set the function selector to 0, then the appliance can be

operated again as usual.

Time-setting options

You use the timer menu to make the following settings:

Š Short-term timer

p Stopwatch

6 Cooking time (not in standby mode)

5 Cooking time end (not in standby mode)

Calling up the timer menu

You can call up the timer menu from any mode. Only

from the basic settings, function selector is set to S, the

timer menu is not available.

Touch the M symbol.

The timer menu is displayed.

Timer

The timer runs independently of the other appliance

functions. You can enter a maximum of 90 minutes.

Setting the timer

1Call up timer menu.

The "Timer" Š function is displayed.

2Turn the rotary selector to set the required cooking

time.

3Start with I.

6KRUWWHUPWLPHU



Time-setting options en

The timer menu closes and the time begins to count

down. The Š symbol and the countdown appear in the

display.

A signal sounds once the time has elapsed. Touch the

™ symbol to silence.

You can exit the timer menu at any time by pressing the

' symbol. This erases the settings.

To stop the timer:

Call up timer menu. Touch C to select the "Timer" Š

function and touch the H symbol. To allow the timer to

continue counting down, touch the symbol I.

Switching off the timer early:

Call up timer menu. Touch C to select the "Timer" Š

function and touch the Ž symbol.

Stopwatch

The stopwatch runs independently of the other

appliance functions.

The stopwatch counts from 0seconds up to 90 minutes.

It also has a pause function, which enables you to

temporarily stop the clock.

Starting the stopwatch

1 Call up the timer menu.

2 Touch C to select the p "Stopwatch" function.

3 Touch I to start.

The timer menu is closed and the timing begins. The p

symbol and the elapsed time are shown in the display.

Pausing and restarting the stopwatch

1 Call up the timer menu.

2 Touch C to select the p "Stopwatch" function.

3 Touch the H symbol.

The time stops. The symbol changes to I Start.

4Touch I to start.

The time continues to run. When 90minutes is reached,

the display pulsates and signal sounds. The signal stops

when you touch the ™ symbol. The p symbol on the

display goes out. The process has finished.

To switch off the stopwatch:

Call up the timer menu. Touch C to select the p

"Stopwatch" function and touch the Ž symbol.

Cooking time

If you set a cooking time for your meal, the appliance

switches off heating automatically after the selected

time.

You can set a cooking time from 1 minute to 23 hours

59 minutes.

Setting the cooking time

You have set the type of heating and temperature and

placed your food in the cooking compartment.

1Touch the M symbol.

2Use C to select the 6 "Cooking time" function.



6WRSZDWFK





6WRSZDWFK



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BSP251 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP251

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info