Bedienungsanleitung Gaggenau BSP251101 (Seite 31 von 56) (Englisch)

755814

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Home Connect

If the display shows "Network connection successful",

the connection process is complete. Follow the

instructions in the app.

Connecting the appliance to the app

Connect your appliance to the app when setting up

Home Connect or connect your appliance to an

additional Home Connect account. The Home Connect

app can be installed on any number of mobile devices,

which can then be connected to the appliance.

Requirements:

▯The appliance is connected to the home network.

▯The Home Connect app has been installed on the

mobile device.

1To connect an additional account, select "Home

Connect" in the basic settings.

2Use the rotary selector to select "Connect to app".

3Touch the % symbol and start the connection

process with ™.

4Follow the instructions in the app.

If the display shows "Connection to app successful", the

connection process is complete.

Remote Start

Remote start must be activated in order to start and

operate your appliance via the Home Connect app. If

remote start is deactivated, the Home Connect app will

only show the operating modes of the appliance and let

you configure the settings.

Remote start is automatically deactivated in the

following situations:

▯The appliance door is opened at least 15minutes

after remote start has been activated.

▯The appliance door is opened at least 15minutes

after operation has ended.

▯24hours after remote start has been activated.

When you start a type of heating using the controls on

the appliance, remote start is activated automatically.

You can now make changes or start a new programme

from your mobile device.

Activating remote start

1Set the function selector to ž

2Touch the × symbol.

The symbol × appears next to the ( symbol.

Remote start is activated. You can now start a heating

mode via the app on the mobile device and send the

desired settings to the appliance.

Touch the í symbol to deactivate remote start.

Home Connect settings

Home Connect can be adapted to your specific needs at

any time.

Note: You will find the Home Connect settings in the

basic settings for your appliance. Which settings the

display shows will depend on whether Home Connect

has been set up and whether the appliance is

connected to your home network.

Basic setting Permitted settings Explanation

Connection type LAN/Wi-Fi You can switch between connection types (LAN cable and

Wi-Fi).

Follow the instructions for setting up the relevant connection

type.~ "Setting up" on page 29

Connecting Connect/disconnect Switch the network connection on or off as required (e.g. for

holiday).

Network information is retained after the appliance is

switched off.After switching on the appliance, you will need

to wait for a few seconds while it reconnects to the network.

In networked standby mode, the appliance requires max. 2 W.

Connect to app Start the connection process between the app and the appli-

ance.

Software update As soon as a new software version is available, a message

appears in the display. You can install the new software in the

Home Connect menu Í.

Home Connect en

Remote diagnostics

Customer Service can use Remote Diagnostics to

access your appliance if you contact them, have your

appliance connected to the Home Connect server and if

Remote Diagnostics is available in the country in which

you are using the appliance.

Note: For further information and details about the

availability of Remote Diagnostics in your country,

please visit the service/support section of your local

website: www.home-connect.com

About data protection

When your appliance is connected for the first time to a

WLAN network, which is connected to the Internet, your

appliance transmits the following categories of data to

the Home Connect server (initial registration):

▯Unique appliance identification (consisting of

appliance codes as well as the MAC address of the

installed WiFi communication module).

▯Security certificate of the WiFi communication

module (to ensure a secure IT connection).

▯The current software and hardware version of your

domestic appliance.

▯Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use these Home Connect functions for the first time.

Note: Ensure that the Home Connect functions can be

used only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Declaration of Conformity

Gaggenau Hausgeräte GmbH hereby declares that the

appliance which features Home Connect is in

accordance with the basic requirements and the other

relevant provisions of the directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found

online at www.gaggenau.com on the product page for

appliance in the additional documents.

2.4GHz band: max. 100mW

5GHz band: max. 100mW

Remote control Activate/deactivate Access the appliance's functions via the Home Connect app.

When deactivated, only the appliance's operating statuses

will be displayed in the app.

Delete network set-

tings

All network settings can be deleted from the appliance at any

time.

Appliance information The display shows:

▯MAC address COM module

▯Serial number of the appliance

▯Software version

You can view more information – such as the SSID (network

name), although this depends on the connection type – by

touching the arrow button.

BE BG CZ DK DE EE IE EL

ES FR HR IT CY LV LT LU

HU MT NL AT PL PT RO SI

SK FI SE UK NO CH TR

5GHz Wi-Fi: for indoor use only

Gaggenau BSP251101 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP251101

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info