Bedienungsanleitung Gaggenau BSP260111 (Seite 15 von 56) (Englisch)

755795

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Before using for the first time

Before using for the first time

Before using for the f i rst time

In this section, you can find out what you must do

before using your appliance to prepare food for the first

time. First read the section entitled ~ "Important

safety information" on page 5.

The appliance must be fully installed and connected to

the mains.

After connecting the appliance to the power supply, the

"Initial settings "menu will be displayed. Now you can

now configure your new appliance for initial set-up.

Notes

– The "Initial settings" menu will appear only after the

appliance has been connected to a power supply

and switched on for the first time, or if the

appliance has not been connected to a power

supply for a number of days.

Once the appliance has been connected to a power

supply, the GAGGENAU logo will appear first for

approximately 30seconds. The "Initial settings"

menu will then appear automatically.

– You can change the settings at any time in the basic

settings.

Setting the language

The preset language appears in the display.

1Turn the rotary selector to select the required

display language.

2Confirm with ™.

Setting the time format

The two possible formats 24h and AM/PM appear in the

display. The default is the 24h format.

1Use the rotary selector to select the desired format.

2Confirm with ™.

Setting the clock

The time is shown in the display.

1Set the desired time using the rotary selector.

2Confirm with ™.

Setting the date format

The three possible formats D.M.Y, D/M/Y and M/D/Y

appear in the display. The default is the D.M.Y format.

1Use the rotary selector to select the desired format.

2Confirm with ™.

Setting the date

The preset date appears in the display. The day setting

is already active.

1Set the day using the rotary selector.

2Touch the C symbol to switch to the month setting.

3Set the month using the rotary selector.

4Touch the C symbol to switch to the year setting.

5Set the year using the rotary selector.

6Confirm with ™.

Setting the temperature unit

The two possible units °C and °F will appear on the

display. The default unit is °C.

1Use the rotary selector to select the unit you

require.

2Confirm with ™.

Setting the water filter

"Water filter" appears on the display. "Available "is set

by default.

If the water hardness exceeds 7°dH or the carbonate

hardness exceeds 5°dH, we recommend that you use

the descaling system GF 111100.

1Use the rotary selector to select either "Available"

(with water filter) or "Not available" (without water

filter).

2Press ™ to confirm.

3If water filter "Available "was selected:

"Water filter capacity" appears on the display.

4Use the rotary selector to select the capacity of the

water filter used (100–9000litres). Observe the

information supplied with the water filter.

5Press ™ to confirm.

Setting the water hardness

"Water hardness" appears on the display.

Note: The water hardness display only appears if "Water

filter - Not available" is selected.

1Use the enclosed carbonate hardness test to check

the tap water: Fill the measurement tubing up to the

5ml fill mark with tap water.

2Add the indicator solution drop by drop until the

colour changes from purple to yellow.

Important: Count the drops and carefully turn the

measuring tubing after every single drop until the

solution is thoroughly mixed in. The number of

droplets corresponds to the water hardness.

Water filter en

3Using the rotary selector, set the measured water

hardness. The value 12is set by default.

4Press ™ to confirm.

Ending initial set-up

"Initial set-up complete" will appear on the display.

Confirm with ™.

The appliance will switch to standby mode and the

standby display will appear. The appliance is now ready

to use.

Grease filter

Hook the enclosed grease filter onto the two bolts on

the back wall of the cooking compartment. Ensure that

you do not scratch the back wall when doing so.

Leave the grease filter in the cooking compartment for

all applications. Clean the grease filter with hot soapy

water or in the dishwasher every time heavy dirt

deposits have been left behind after cooking.

Cleaning the door panel

The door seal has been greased in the factory to make it

leaktight. There may be traces of grease left on the door

panel.

Clean the door panel with glass cleaner and a window

cloth or microfibre cloth before using the appliance for

the first time. Do not use glass scrapers.

Cleaning accessories

Before using the accessories for the first time, clean

them thoroughly using hot detergent solution and a soft

cloth.

Heating up the appliance

Make sure that there is no leftover packaging in the

cooking compartment.

To eliminate the new-appliance smell, heat up the empty

appliance with the door closed. One hour with hot air H

+ 60% humidity at 200 °C is ideal for this.

Water filter

Operation with or without a water

filter

You can use the appliance with or without a water filter.

If the water hardness exceeds 7°dH or carbonate

hardness 5°dH, we recommend the installation of the

descaling system GF 111 100.

Changing the water filter

Filter cartridges should be replaced regularly.

Replacement cartridges are available from after-sales

service or in the online shop (order number

GF 121 110).

The capacity of the filter cartridge depends on the

frequency of use of the appliance and your regional

water hardness. A message will appear in the display to

remind you when the filter needs to be replaced.

Regardless of the actual amount of water filtered the

filter cartridge needs to be changed after 12 months at

the latest.

1Set the function selector to S. Select "Water filter

change" using the rotary selector.

2The œ symbol is displayed. Confirm with ™.

3Change the water filter cartridge. Refer to the

instructions included with the filter cartridge.

Confirm with ™.

4"Water filter capacity" is shown in the display.

Confirm with ™.

5Turn the rotary selector to select the capacity of the

filter cartridge (between 100- 9000 litres). Confirm

with ™.

The water filter change is complete. Confirm with ™.

The appliance is now ready for operation.

Gaggenau BSP260111 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP260111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info