Bedienungsanleitung Gaggenau BSP260111 (Seite 23 von 56) (Englisch)

755795

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Childproof lock

Childproof lock

The appliance has a childproof lock to prevent children

operating it accidentally.

Notes

– To use the childproof lock, you will need to set it to

"available" in the basic settings.

– If there is a power cut after the childproof lock has

been activated, the childproof lock may be

deactivated when the power comes back on.

Activate the child lock

Prerequisite:

The function selector is set to 0.

Touch and hold the 0 symbol for at least 6 seconds.

The child lock is activated. The standby screen appears.

The 0 symbol is shown at the top of the display.

Deactivating the child lock

Prerequisite:

The function selector is set to 0.

Touch and hold the 1 symbol for at least 6 seconds.

The child lock is deactivated. You can set the appliance

as usual.

Automatic programmes

Automati c programmes

You can prepare a wide range of food using the

automatic programmes. The appliance will choose the

optimal setting for you.

To achieve good results, the cooking compartment must

not be too hot for the type of food you have selected. If

it is, a message will appear on the display. Allow the

appliance to cool and then try again.

Information on the settings

▯The cooking result depends on the quality of the

food and the size and type of cookware. For an

optimal cooking result, only use food that is in good

condition and meat that is chilled to refrigerator

temperature. For frozen food, only use food straight

out of the freezer.

▯The automatic programme suggests a temperature,

type of heating and cooking time.

▯For some dishes, you will be required to enter the

weight. It is not possible to set weights outside the

preprogrammed weight range.

▯For some dishes, you will be asked to enter desired

level of browning, the thickness of the food and/or

the cooking level of the meat or vegetables.

▯For some dishes, the cooking compartment is

preheated empty. Place the food in the cooking

compartment once the preheating is complete and

a message appears in the display.

▯Your preferred settings will be shown next time as a

suggestion.

Core temperature probe

For some recipes, you will need the core temperature

probe. Use the core temperature probe for these

recipes. ~ "Core temperature probe" on page 26

Automatic programmes en

Selecting a dish

The following categories are available. One or more

dishes are listed beside each category.

Note: The last selected category is displayed in the first

position.

Categories:

▯Meat and poultry

▯Fish

▯Vegetables

▯Side and oven dishes

▯Dessert

▯Bread and pastries

▯Raising dough

▯Regenerating

▯Defrosting

Applying settings for a dish

You are guided through the entire setting process.

Follow the instructions in the display.

Use the rotary selector to scroll through the individual

levels.

1Set the function selector to ž.

2Touch the i symbol. Press ™ to confirm.

3Use the rotary selector to select the category and

press ™ to confirm.

4Use the rotary selector to select the required dish

and press ™ to confirm.

The possible settings appear in the display. For

many dishes, you can change the settings to suit

your needs.

For some dishes, you must set the weight.

Tip: By pressing the * symbol, you can receive

information about accessories and preparation

methods.

5Press ™ to confirm the required settings. Follow

the directions in the display.

Once the cooking time has elapsed, the appliance stops

heating up and steam removal takes place. An audible

signal sounds.

Opening the appliance door affects the cooking result.

Open the appliance door only briefly. The automatic

programme is interrupted and continues to run after

closing the appliance door.

Adding extra cooking time

After the cooking time has ended, you can leave some

dishes to continue cooking if you are not satisfied with

the cooking result.

A query appears in the display asking if you want to

continue cooking.

1Press ™ to confirm.

2Select a single or double cooking time, depending

on requirements.

3Press I to start.

4If the "Continue cooking" function has ended, turn

the function selector to 0.

Note: If you touch the ¡ symbol during continued

cooking, the steam removal and the continue cooking

function is ended.

Changing and cancelling

After starting the appliance, the settings can no longer

be changed.

If you want to cancel the operation, turn the function

selector to 0.

Calling up the last automatic

programmes used

The last five dishes with the selected settings are saved.

You have the option of saving these dishes with the

selected settings as individual recipes. You can no

longer retroactively change the settings of individual

recipes if you have not saved it using the "Last

automatic programmes" function.~ "Individual recipes"

on page 24

1Set the function selector to ž.

i is displayed.

2Touch the i symbol.

3Use the rotary selector to select "Last automatic

programmes" and press ™ to confirm.

4Use the rotary selector to select the required dish

and press ™ to confirm.

5Enter a name for the dish and save. ~ "Entering

names" on page 25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau BSP260111 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP260111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info