Bedienungsanleitung Gaggenau BSP270111 (Seite 37 von 56) (Englisch)

755787

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Cleaning and maintenance

Causes of an unsatisfactory cleaning result

If the cooking compartment is still not clean once the

cleaning programme has ended, use the table below to

help you identify the causes. Then insert a new cleaning

cartridge and start the cleaning programme again.

Drying programme

You can use the drying programme to dry the cooking

compartment quickly.

The drying programme runs for 20 minutes.

Starting the drying program

1Set the function selector to S. Select the drying

program with the rotary selector.

2The j symbol is displayed. Touch ™ to confirm.

3The drying time of 20 minutes appears. Touch I to

start. The drying time elapses on the display. The

lamp in the cooking compartment stays off.

4A signal sounds after 20 minutes. A message

appears in the display. Touch ™ to confirm.

The drying programme has ended. Allow the appliance

to cool down. Then polish the cooking compartment and

the panel with a soft cloth.

Descaling programme

Regular descaling keeps the appliance in good

condition. The descaling programme descales and

rinses the appliance fully automatically.

Depending on the type of water and your use of the

appliance, a message in the display reminds you to run

the descaling programme.

To prevent damage to the appliance, the operating

modes that use steam are disabled after this message

has been repeated. You can still use the appliance to

run operating modes that do not require steam. Only

once the descaling programme has been run can the

appliance be used again without restrictions.

The descaling programme takes 1 hour 45 minutes from

beginning to end.

For the descaling programme, you require special

descaling tablets. These are available from the after-

sales service or from our online shop (17002490, set

with four descaling tablets).

Caution!

–Risk of damage to the appliance: Limescale may

damage the appliance. Descale the appliance

regularly.

–Risk of damage to the appliance: Using the

wrong descaler may damage the appliance. Only

use the specified descaling tablets.

–Damage to the cooking compartment: Use the

descaling tablet for the descaling programme only.

Place the descaling tablet into the tank. Never

place the descaling tablet in the cooking

compartment or heat it up in the cooking

compartment.

Notes

– Remove all accessories from the cooking

compartment before starting the descaling

programme (wire rack, cooking containers, core

temperature probe).

– The strainer filter must remain inserted in the

cooking compartment floor while the descaling

programme is in progress.

– Always allow the descaling programme to run to the

end. The descaling programme cannot be

cancelled.

– Depending on the water type and your use of the

appliance, descaling may still be required even if

you use the water descaling system. A message

appears in the display to remind you of this.

Possible cause Solution

Locking cap on the

cleaning cartridge

The locking cap has not been

removed from the cleaning car-

tridge.

Once the cleaning programme has

ended, remove the cartridge from

the appliance. Do not reuse the car-

tridge. Dispose of the cartridge in

accordance with the local regula-

tions.

mWarning – Risk of injury!

To prevent the detergent from

coming into contact with your skin

or eyes, do not remove the locking

cap from a spent cartridge.

Strainer filter not

inserted

The strainer filter must remain

inserted in the cooking compart-

ment floor while the cleaning pro-

gramme is in progress.

Power failure Following a power cut that lasts

longer than 3minutes, the cleaning

programme is ended with a short

programme.

Stubborn burnt-on food

residues

Run the cleaning programme again

to remove stubborn food residues.

'U\LQJSURJUDPPH



_

Cleaning and maintenance en

Starting the descaling program

1Set the function selector to S.Use the rotary

selector to select the descaling program.

2The ‘ symbol will be displayed. Press ™ to

confirm.

3The switch-off time at which the descaling program

will end is displayed. If required, you can alter the

switch-off time using the rotary selector. Press ™

to confirm.

4Remove all accessories from the cooking

compartment. Press ™ to confirm.

5Remove the descaling tablet from the plastic

packaging.

mWarning – Risk of injury!

Descaling tablets may cause chemical burns in the

mouth, throat, eyes and on the skin. Follow the

safety instructions on the packaging of the

descaling tablets. Avoid the skin coming into

contact with the descaling tablets. Keep children

away from descaling tablets.

mWarning – Risk of injury!

The descaling solution may cause chemical burns in

the mouth, throat and eyes or on the skin. Avoid the

skin coming into contact with the descaling

solution. Keep children away from descaling

solution. Do not drink the descaling solution. The

descaling solution must not come into contact with

food. Rinse out the water tank thoroughly before

you next use the appliance.

Caution!

Risk of damage to the appliance

Using the wrong descaler may damage the

appliance. Only use the specified descaling tablets.

6Remove the tank from the appliance and take off

the lid.

7Place the descaling tablet in the compartment at

the back of the tank. Fill the tank with water up to

the "Max." mark (1.7 litres).

8Position the lid on the tank and click it into place.

9Slide the tank into the appliance.

10 Close the appliance door. Press ™ to confirm. A

descaling time of 1 hour 45 minutes is displayed.

11 Press I to start. The descaling time will count down

on the display. The light in the cooking

compartment remains switched off.

Note: After approximately 1:30 hours, a message

appears in the display. Remove and drain the tank.

Clean the tank thoroughly. Fill the tank with fresh

water. Slide the tank into the appliance. Confirm by

pressing ™. Press I to start the rinsing process.

Drying the cooking compartment

Dry the cooking compartment after descaling using the

drying program. Remove the water tank and dry it with a

soft cloth.

Removing the wire racks

The wire racks can be removed for cleaning.

Removing the wire racks

1Place a dishcloth in the cooking compartment to

protect the enamel from scratches.

2Undo the knurled nuts (Fig. A).

3Lift the wire racks slightly sideways away from the

screw and pull them out towards the front (Fig. B).

You can clean the wire racks in the dishwasher.

Refitting the wire racks

1Attach the wire racks the right way round – with the

end stop at the back.

2Slide the back of wire racks onto the bolts, then

reattach them at the front.

3Tighten the knurled nuts.

Note: If a knurled nut is lost, you can order this from our

after-sales service after as a spare part.The use of non-

original knurled nuts may lead to corrosion in the

cooking compartment.

O

0D[

/



Gaggenau BSP270111 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau BSP270111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info