Changing a time value
Select the cooking zone. Touch the q symbol. Use
the twist knob to change the duration.
Erasing a time value
Select the cooking zone. Touch the q symbol. Set
the duration to 00. The display goes out after a few
seconds. The cooking zone continues heating at the
selected level.
Note
The timer function is no longer active after a power
cut.
Timer
You can use the timer independently from the
cooking zones and without switch-off function. The
timer can also be used when all cooking zones are
switched off.
Setting the timer
The cooktop must be switched on by the main
switch. No cooking zone should be selected.
1 Touch the q symbol. 00 flashes on the timer
display.
2 Use the twist knob to set the required duration.
If all cooking zones are switched off, the cooktop
will go on stand by mode. Only the timer display
stays on.
When the duration has elapsed, 00 flashes on the
timer display. A signal sounds for three minutes.
Touch the q symbol. The display will go out and the
audible signal will stop.
Changing a time value
Touch the q symbol. Change the duration.
Note
The timer is no longer active after a power cut.
15
