Bedienungsanleitung Gaggenau CI261114 (Seite 15 von 24) (Englisch)

761556

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en Timer functions

Timer functions

Timer functi ons

Your hob has two timer functions:

▯Cooking timer

▯Short-term timer

Cooking timer

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1Select the hotplate and the required heat setting.

2Touch the 0 symbol. x lights up in the display for

the hotplate. ‹‹ lights up in the timer display.

3Within the next 10 seconds, select the required

cooking time in the control panel

After a few seconds, the time begins to elapse.

Note: The same cooking time can be set automatically

for all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically programming

the cooking time in section ~ "Basic settings"

Changing or deleting the time

Select the hotplate and then touch the 0 symbol.

To delete the cooking time, change the cooking time in

the control panel or set it to ‹‹ .

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up ‹‹ for 10 seconds in

the display.

When the 0 symbol is pressed, the indications turn off

and the beeping stops.

Notes

– If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

– Select the relevant hotplate to call up the remaining

cooking time.

– You can set a cooking time of up to ŠŠ minutes.

The short-term timer

You can use the short-term timer to set a time of up to

99 minutes.

This works independently from the hotplates and from

other settings. This function does not automatically

switch off a hotplate.

Programming

1Press the 0 symbol several times until the

V indicator lights up. ‹‹ appears in the time

programming function display.

2Use the ó to ê buttons to set the required time.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Press the 0 symbol several times until the V indicator

lights up.

Adjust the time in the control panel or set it to ‹‹ to

end the timer.

When the time has elapsed

An audible signal sounds. ‹‹ flashes in the time

programming function display and the "on" timeV lights

up. The indicators switch off after 10 seconds.

Press the 0 symbol to switch off the indicators.

 

Booster function for pots en

Booster function for pots

Booster functi on for pots

This function allows large volumes of water to be heated

up even more quickly than with power setting Š. The

saucepan booster function temporarily increases the

maximum output of the selected hotplate.

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise, › and Š will flash in

the display for the selected hotplate; the Š heat setting

will then be set automatically without activating the

function.

Activation

1Select a hotplate.

2Touch the Ž symbol.

› lights up on the display.

The function is activated.

Deactivation

1Select the hotplate.

2Touch the Ž symbol.

The › display goes out and the hotplate switches

back to the Š heat setting.

The function is deactivated.

Note: Under certain circumstances, the Booster

function may switch itself off automatically in order to

protect the electronic components inside the hob.

Childproof lock

You can use the childproof lock to prevent children from

switching on the hob.

Activating and deactivating the

childproof lock

The hob must be switched off.

To activate: Touch the š symbol for approx. four

seconds. The H indicator lights up for 10 seconds. The

hob is locked.

To deactivate: Touch the š symbol for approx.

four seconds. The lock is released.

Childproof lock

With this function, the childproof lock automatically

activates when a hob is switched off.

Switching on and off

You can find out how to switch the automatic childproof

lock on in the ~ "Basic settings" section





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI261114 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI261114

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info