Bedienungsanleitung Gaggenau CI261114 (Seite 19 von 24) (Englisch)

761556

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en Basic settings

--------

To access the basic settings:

The hob must be off.

1Switch on the hob.

2Within ten seconds, touch and hold the 0 symbol

for approximately four seconds.

The first four displays provide product information.

Touch the settings area to view the individual

displays.

3Touching the 0 symbol again takes you to the

basic settings.

™ and ‚ flash alternately on the displays and ‹

appears as a presetting.

4Touch the 0 symbol repeatedly until the required

function is displayed.

5Then select the required setting from the settings

area.

6Touch the 0 symbol for at least four seconds.

The settings have been saved.

Leaving the basic settings

Turn off the hob with the main switch.

™‹

Restore to standard settings

‹Individual settings.*

‚Restore factory settings.

* Factory setting

**The hob's maximum power output is shown on the rating plate.

Product information Display

Directory for the technical after-sales service

(TK)

‹‚

Production number ”š

Production number 1 Š†.

Production number 2 ‹.†

Cookware check en

Cookware check

This function can be used to check the speed and

quality of the cooking process depending on the

cookware.

The result is a reference value and depends on the

properties of the cookware and the hotplate being used.

1With the cookware still cold, fill it with approx.

200 ml of water and place it on the centre of the

hotplate with the diameter that most closely

matches that of the base of the cookware.

2Go to the basic settings and select the ™‚ƒ

setting.

3Touch the settings range. A will flash on the

hotplate display.

The function has now been activated.

After 10 seconds, the result for the quality and speed of

the cooking process will appear on the hotplate display.

Check the result using the following table:

To reactivate this function, touch the settings range.

Notes

– If the diameter of the hotplate used is much smaller

than the diameter of the cookware, only the middle

of the cookware can be expected to heat up. This

may result in the cooking results not being as good

as expected or being less than satisfactory.

– You can find information on this function in the

section on ~ "Basic settings".

– You can find information on the type, size and

positioning of the cookware in the section on

~ "Induction cooking".

Power manager

You can use the power manager to set the total power of

the hob.

The hob is preset at the factory. Its maximum

performance is specified on the rating plate. You can

use the power manager to change the value in

accordance with the requirements for the relevant

electrical installation.

In order not to exceed this set value, the hob

automatically distributes the power available between

the cooking zones that are switched on.

As long as the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached, ¬ appears in the heat setting

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

For more information about how the total power of the

hob is changed, see section ~ "Basic settings"

Result

‹The cookware is not suitable for the hotplate and will

therefore not heat up.*

‚The cookware is taking longer to heat up than expected

and the cooking process is not going as well as it

should.*

ƒThe cookware is heating up correctly and the cooking

process is going well.

* If there is a smaller hotplate available, test the cookware

again on the smaller hotplate.

Y| [|

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI261114 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI261114

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info