Bedienungsanleitung Gaggenau CI262115 (Seite 49 von 60) (Englisch)

761558

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Hood connection

About data protection

When your appliance is connected for the first time to a

WLAN network, which is connected to the Internet, your

appliance transmits the following categories of data to

the Home Connect server (initial registration):

▯Unique appliance identification (consisting of

appliance codes as well as the MAC address of the

installed WiFi communication module).

▯Security certificate of the WiFi communication

module (to ensure a secure IT connection).

▯The current software and hardware version of your

domestic appliance.

▯Status of any previous resetting to factory settings.

This initial registration prepares the Home Connect

functions for use and is only required when you want to

use these Home Connect functions for the first time.

Note: Ensure that the Home Connect functions can be

used only in conjunction with the Home Connect app.

Information on data protection can be accessed in the

Home Connect app.

Declaration of Conformity

Gaggenau Hausgeräte GmbH hereby declares that the

appliance which features Home Connect is in

accordance with the basic requirements and the other

relevant provisions of the directive 2014/53/EU.

A detailed RED Declaration of Conformity can be found

online at www.gaggenau.com on the product page for

appliance in the additional documents.

2.4 GHz band: max. 100 mW

5 GHz band: max. 100 mW

Hood connection

Hood connecti on

You can connect this appliance to a suitable extractor

hood and then control the functions of the hood via your

hob.

There are various options for connecting the appliances

together:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect-compatible.

Refer to the Home Connect documents supplied for

more information.

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, it cannot be connected to your home network as

well. The appliance functions as a hob with no network

connection. The hob can always be operated via the

control panel.

BE BG CZ DK DE EE IE EL

ES FR HR IT CY LV LT LU

HU MT NL AT PL PT RO SI

SK FI SE UK NO CH TR

5 GHz Wi-Fi: for indoor use only

Hood connection en

Connecting appliances via your home network

If the appliances are connected to each other via your

home network, both the hood controls and Home

Connect can be used to operate the hob.

Notes

– Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.~ "Important safety information" on page 6

– If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to

use the hood controls on the hob during this time.

– In networked standby mode, your appliance

requires a maximum of 2 W.

Setting up

To set up the connection between the hob and cooker

hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.

For more information, refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note: If you connect your hob directly to the extractor

hood, it cannot be connected to your home network as

well and you will not be able to use Home Connect.

1Open the basic settings.

2Touch the t symbol repeatedly until the ™“

setting appears.

‹”” will be lit on the hotplate display.

3Set the value to ‚ using the twist knob.

‚ will flash on the hotplate display.

4You have 2 minutes to initiate the connection

process on the extractor hood.

Once the hob is connected to the extractor hood, the

value ‹¯ appears on the hotplate display. The symbols

for the hood controls on the hob are displayed on the

hob's control panel.

Connecting via your home network

You require a router that has WPS functionality.

You require access to your router.If you do not have this,

follow the steps for "Direct connection".

When you begin, make sure that the extractor hood is on

your home network.

1Open the basic settings.

2Touch the t symbol repeatedly until the ™“

setting appears.

‹”” will be lit on the hotplate display.

3Set the value to ‚ using the twist knob.

‚ will flash on the hotplate display.

4Press the WPS button on the router within the next

2 minutes.

The hob will be connected to your home network

and the value ƒ will appear on the hotplate display.

5Initiate the process for connecting to the extractor

hood.

Once the hob is connected to the extractor hood, the

value ‹¯ appears on the hotplate display. The symbols

for the hood controls on the hob are displayed on the

hob's control panel.

Note: Connection can only be established when both

appliances are connected to your home network and the

connection process has been initiated for both of them.

If the connection process has already timed out for one

of the two appliances, try to connect again (basic

settings, ™“ setting).

Resetting connection

You can reset the connections you have saved for your

home network and extractor hood at any time.

1Open the basic settings.

2Touch the t symbol repeatedly until the ™“

setting appears.

3Set the value to ‹”” using the twist knob.

Gaggenau CI262115 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI262115

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info