Bedienungsanleitung Gaggenau CI272103 (Seite 13 von 60) (Englisch)

761560

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Getting to know your appliance

Touch keys

When the hob heats up, the symbols for the touch keys

available at this time light up.

Touching a symbol activates the associated function. A

confirmation signal sounds.

Notes

– The corresponding symbols for the touch keys light

up depending on whether they are available.

The indicators for the available functions light up in

white. Once a function is selected, its indicator

lights up in orange.

– Always keep the control panel clean and dry.

Moisture can prevent it from working properly.

– Do not pull cookware close to the displays and

sensors. The electronics could overheat.

The hotplates

Residual heat indicator

The hob has a residual heat indicator for each hotplate.

This indicates that a hotplate is still hot. Do not touch a

hotplate while the residual heat indicator is lit up.

The following indicators are shown depending on the

amount of residual heat:

▯Display •: High temperature

▯Display œ: Low temperature

If you remove the cookware from the hotplate during

cooking, the residual heat indicator and the selected

heat setting will flash alternately.

When the hotplate is switched off, the residual heat

indicator will light up. Even after the hob has been

switched off, the residual heat indicator will stay lit for

as long as the hotplate is still warm.

Hotplates

ÛSimple hotplate Use cookware that is a suitable size.

áFlexible cooking zone See section ~ "Flex function"

à / ßFlexPlus cooking zone The FlexPlus cooking zone always switches on in conjunction with the right- or left-hand

flexible cooking zone. See section ~ "FlexPlus cooking zone"

Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"

Twist-Pad with Twist knob en

Twist-Pad with Twist knob

Twist- Pad with Twist knob

The twistpad is the area in which you can use the twist

knob to select the hotplates and heat settings. The twist

knob automatically centres itself in the twistpad area.

The twist knob is magnetic and is placed on top of the

twistpad. To activate a hotplate, touch the twist knob at

the level for the required hotplate. Turning the twist

knob selects the heat setting.

Position the twist knob on the twist pad so that it is in

the centre of the indicators which delimit the twist pad

area.

Note: Even if the twist knob is not entirely central, this

will not affect how the twist knob works.

Removing the twist knob

Removing the twist knob activates the wipe protection

function.

The twist knob can be removed during cooking. The

wipe protection function is activated for 10 minutes. If

the twist knob is not returned to its position before this

time elapses, the hob will switch off.

mWarning – Risk of fire!

If a metallic object is placed in the twist pad area during

these 10 minutes, the hob may continue to heat up. For

this reason, always switch off the hob using the main

switch.

Storing the twist knob

A strong magnet is located inside of the twist knob.

Keep the twist knob away from magnetic data carriers

such as credit cards and cards with magnetic strips.

Otherwise, these data carriers may be damaged beyond

repair.

The magnet may also cause faults on televisions and

screens.

Note: The twist knob is magnetic. Metal particles stuck

to the bottom may scratch the surface of the hob.

Always clean the twist knob thoroughly.

Operating the appliance

Operati ng the appliance

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

Switching the hob on and off

Use the main switch to switch the hob on and off.

When you first switch on the appliance, you will be

prompted to set up your home network. The · symbol

will be lit dimly for a few seconds on the display panel.

To begin setting up the connection, touch the · sensor

and proceed in accordance with the information given in

the section entitled~ "Home Connect" on page 43. To

exit initial set-up, touch any sensor.

To switch on: Position the twist knob on the control

panel. Touch the # symbol. The symbols for the

cooking zones and the functions available at this time

light up. ‹ lights up next to the cooking zones. The hob

is ready for use.

To switch off: Touch the # symbol until the display

goes out. All the hotplates are switched off. The

residual heat indicator remains lit until the cooking

zones have cooled down sufficiently.

Notes

– If the appliance has not been connected to your

home network or the connection has been broken,

network connection initial set-up will be activated

whenever you switch on the hob.

– The hob will automatically switch itself off if all

hotplates have been switched off for more than

20 seconds.

– The selected settings are stored for 5 seconds after

the hob has been switched off.

If the hob is switched back on during this time, the

heat settings that were previously set will flash. To

apply these settings, tap on the twist knob within

the next 5 seconds.

If you do not tap the twist knob or you touch a

different sensor button, all the previous settings will

be deleted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI272103 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI272103

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info