761560
39
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
38
en Wireless temperature sensor
Wireless temperature sensor
Wi reless temperature sensor
Before you use the cooking sensor functions for the
first time, connect the wireless temperature sensor to
the control panel.
Preparing and maintaining the
wireless temperature sensor
This section provides information on:
Adhering the silicone patch
Attaching the wireless cooking sensor
Cleaning
Changing the battery
Silicone patches and cooking sensors can be
purchased from specialist retailers, our technical after-
sales service or our official website. Please quote the
relevant reference number when doing so:
Adhering the silicone patch
The silicone patch secures the cooking sensor to the
cookware.
If you are using a pot with the cooking sensor functions
for the first time, attach the silicone patch directly onto
the pot. Proceed as follows:
1That the adhesive area on the pan is free from
grease. Clean the pan, dry it thoroughly and wipe
the adhesive area with a spirit.
2Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the pan
in the correct place using the enclosed template as
a guide.
3Press down all over the surface of the silicone
patch, including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
Make sure that the silicone patch is completely dry
before attaching the temperature sensor.
Position the cookware in such a way that the
temperature sensor is pointing towards the outer
side of the hob.
To prevent overheating, the temperature sensor
must not be pointed towards another item of
cookware that is hot.
Remove the temperature sensor from the saucepan
after cooking. Store it in a clean, safe place away
from sources of heat.
You can use up to three temperature sensors at the
same time.
Connecting the wireless temperature
sensor to the control panel
To connect the wireless cooking sensor to the control
panel, proceed as follows:
1Select the basic setting ™†; see the section
entitled ~ "Basic settings"
. The ¨ symbol lights up white.
2Touch the ¨ symbol. A signal sounds and the ¨
symbol lights up orange. The cooking zone
indicators light up white and the cooking sensor
indicators on the hotplates flash.
Briefly touch the ¨ symbol on the wireless cooking
sensor within the next 30 seconds.
00577921 Set of 5 silicone patches
CA060300 Cooking sensor and set of 5 silicone patches
39
Wireless temperature sensor en
3 Detection successful: The wireless temperature
sensor is detected within a few seconds. Three
short beeps sound and the ¨ symbol changes from
orange to white. The cooking sensor indicators on
the cooking zones go out.
Detection failed: Five beeps will sound. The ¨
symbol immediately changes from orange to white
and the cooking sensor indicators on the cooking
zones go out.
The cooking functions are made available as soon
as the wireless cooking sensor has been connected
to the control panel correctly.
If there is a fault with the wireless cooking sensor,
the connection may not be established correctly for
the following reasons:
Bluetooth communication error.
You have not pressed the ¨ symbol on the
cooking sensor within 30 seconds of selecting
the cooking zone.
The battery in the wireless cooking sensor is
almost flat.
Reset the wireless cooking sensor and repeat the
connection procedure.
If there are problems with the connection due to a
transmission error, repeat the connection
procedure.
If a connection cannot be established, inform the
after-sales service.
Resetting the wireless temperature sensor
1Touch and hold the ¨ symbol for approximately 8-
10 seconds.
While you are doing this, the temperature sensor's
LED indicator will light up three times. When the
LED lights up for the third time, it will start to reset
the temperature sensor. At this point, you will need
to lift your finger off the symbol.
Once the LED goes out, this means that the
wireless temperature sensor has been reset.
2Repeat the connection procedure from point 2.
Cleaning
Do not clean the wireless temperature sensor in the
dishwasher.
Temperature sensor
Clean the temperature sensor with a damp cloth. Never
clean it in the dishwasher. Do not immerse it in water or
clean it under running water.
Remove the temperature sensor from the saucepan after
cooking. Store it in a clean, safe place (such as in its
packaging) away from sources of heat.
Silicone patch
Clean and dry before attaching to the temperature
sensor. Dishwasher safe.
Note: Cookware with the silicone patch must not be left
to soak for long periods in soapy water.
Temperature sensor window
The sensor window must always be clean and dry.
Proceed as follows:
Remove dirt and oil splatters regularly.
Use a soft cloth or cotton buds and window cleaner
for cleaning.
Notes
Do not use abrasive cleaning agents such as
scouring pads, scrubbing brushes or cream
cleaners.
Do not touch the sensor window with your fingers.
This may make it dirty or scratch it.
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gaggenau CI272103 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gaggenau CI272103

Gaggenau CI272103 Bedienungsanleitung - Deutsch - 60 seiten

Gaggenau CI272103 Bedienungsanleitung - Holländisch - 60 seiten

Gaggenau CI272103 Bedienungsanleitung - Französisch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info