Bedienungsanleitung Gaggenau CI282112 (Seite 51 von 60) (Englisch)

761563

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Hood connection

Control the hood via the hob

In the basic settings of your hob you can adjust the

behaviour of your extractor hood depending on the

switch-on/off of the hob or individual cooking zones.

~ "Hood control settings" on page 50

You can select other settings using the control panel.

Setting the fan

Switching on

Touch the } symbol.

Setting fan level

Turn the twist knob clockwise or anti-clockwise to adjust

the fan setting.

The following settings are possible:

Switching off

To switch the fan off and continue cooking:

1Touch the } symbol.

2Use the twist knob to select the fan setting ‹.

To switch off the hob:

How the fan behaves once the hob is switched off

depends on the basic setting you have selected.

If the ¥ symbol is displayed, the fan is in run-on mode.

Note: Even once the hob and fan have been switched

off, the E symbol will still be faintly visible.

Setting the hood lighting

You can switch the hood light on and off via the hob's

control panel.

Touch the ž symbol.

Depending on the basic settings you have selected, the

light will automatically be switched on or off when the

hob is switched on or off. ~ "Hood control settings"

Hood control settings

You can adapt the hood controls to suit your needs at

any time.

Changing the basic settings ~ "Basic settings"

Note: The ™‘, ™›, ™™ and ™š settings are only

displayed if the appliance is connected to an extractor

hood.

Indicator/

symbol

Function

‹Fan off

‘Automatic mode

The fan starts automatically when steam is pro-

duced

‚, ƒ, „Fan settings

Intensity: Low, medium, high

˜PowerBoost function

»Intermittent ventilation

¥Fan run-on

Indicator/

symbol

Function

™“ Hob-to-hood connection

‹”” Not connected*/disconnect.

‚Connect.

ƒConnected to home network.

‹¯ Connected to extractor hood.

™‘ Automatic fan switch-on

‹”” Switched off.

The hood will need to be switched on

manually if required.

‘Switched on in automatic mode.*

In automatic mode, the hood switches

itself on when you switch on one of the

cooking zones.

‚Switched on in manual mode.

The hood switches itself on at the lowest

setting when one of the cooking zones is

switched on.

ƒSwitched on in manual mode.

The hood switches itself on at a medium

setting when one of the cooking zones is

switched on.

„Switched on in manual mode.

The hood switches itself on at the highest

setting when one of the cooking zones is

switched on.

™› Fan run-on

‹”” The fan switches itself off when the hob is

switched off.

‘Switched on in automatic mode.*

‹¯ Switched on with standard fan run-on.

¯‹ Settings cannot be changed.

™™ Switch light on automatically

‹”” Switched off.*

‹¯ Switched on.

The light switches itself on when you

switch on the hob.

™š Switch light off automatically

‹”” Switched off.*

‹¯ Switched on.

The light switches itself off when you

switch off the hob.

* Basic setting

Cookware check en

Cookware check

This function can be used to check the speed and

quality of the cooking process depending on the

cookware.

The result is a reference value and depends on the

properties of the cookware and the hotplate being used.

1With the cookware still cold, fill it with approx.

200 ml of water and place it on the centre of the

hotplate with the diameter that most closely

matches that of the base of the cookware.

2Go to the basic settings and select the ™ˆ setting.

3Touch the control panel. A will flash on the hotplate

display.

The function has now been activated.

After 10 seconds, the result for the quality and speed of

the cooking process will appear in the hotplate display.

Check the result using the following table:

To reactivate the function, turn the twist knob.

Notes

– The flexible cooking zone only counts as a single

cooking zone; place no more than one item of

cookware on it.

– If the diameter of the cooking zone that is used is

much smaller than the diameter of the cookware,

only the middle of the cookware can be expected to

heat up. This may result in the cooking results not

being as good as expected or not being

satisfactory.

– You can find information on this function in the

section entitled ~ "Basic settings".

– You can find information on the type, size and

positioning of the cookware in the sections entitled

~ "Induction cooking" and ~ "Flex function".

Power manager

You can use the power manager to set the total power of

the hob.

The hob is preset at the factory. Its maximum

performance is specified on the rating plate. You can

use the power manager to change the value in

accordance with the requirements for the relevant

electrical installation.

In order not to exceed this set value, the hob

automatically distributes the power available between

the cooking zones that are switched on.

As long as the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached, ¬ appears in the heat setting

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

For more information about how the total power of the

hob is changed, see section ~ "Basic settings"

Result

‹The cookware is not suitable for the hotplate and will

therefore not heat up.*

‚The cookware is taking longer to heat up than expected

and the cooking process is not going as well as it

should.*

ƒThe cookware is heating up correctly and the cooking

process is going well.

* If there is a smaller hotplate available, test the cookware

again on the smaller hotplate.

Y| [|

Gaggenau CI282112 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI282112

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info