Bedienungsanleitung Gaggenau CI283 (Seite 37 von 60) (Englisch)

703235

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Wireless temperature sensor

‚

Wireless temperature sensor

Before you use the cooking sensor functions for the

first time, connect the wireless temperature sensor to

the control panel.

Preparing and maintaining the

wireless temperature sensor

This section provides information on:

▯ Adhering the silicone patch

▯ Attaching the wireless cooking sensor

▯ Cleaning

▯ Changing the battery

Silicone patches and cooking sensors can be

purchased from specialist retailers, our technical after-

sales service or our official website. Please quote the

relevant reference number when doing so:

Adhering the silicone patch

The silicone patch secures the cooking sensor to the

cookware.

If you are using a pot with the cooking sensor functions

for the first time, attach the silicone patch directly onto

the pot. Proceed as follows:

1 That the adhesive area on the pan is free from

grease. Clean the pan, dry it thoroughly and wipe

the adhesive area with a spirit.

2 Remove the protective film from the silicone patch.

Adhere the silicone patch to the outside of the pan

in the correct place using the enclosed template as

a guide.

3 Press down all over the surface of the silicone

patch, including in the centre.

The adhesive requires one hour to fully harden. Do not

use or clean the pan during this time.

Notes

– Do not leave the pan with the silicone patch to soak

soapy water for long periods of time.

– If the silicone patch comes off, attach a new one.

Fitting the wireless temperature sensor

Attach the temperature sensor to the silicone patch and

align it correctly.

Notes

– Make sure that the silicone patch is completely dry

before attaching the cooking sensor.

– Position the cookware in such a way that the

cooking sensor is pointing towards the outer side of

the hob.

– To prevent overheating, do not attach the cooking

sensor to any other hot cookware.

– Remove the cooking sensor from the pot after

cooking. Keep the cooking sensor away from heat

sources, and store it in a clean, safe place away.

– You can use up to two cooking sensors at the same

time.

Connecting the wireless temperature

sensor to the control panel

To connect the wireless cooking sensor to the control

panel, proceed as follows:

1 Select the basic setting ™†; see the section

entitled ~ "Basic settings"

. The ¨ symbol lights up white.

2 Touch the ¨ symbol. A signal sounds and the ¨

symbol lights up orange. The cooking zone

indicators light up white and the cooking sensor

indicators on the hotplates flash.

Briefly touch the ¨ symbol on the wireless cooking

sensor within the next 30 seconds.

00577921 Set of 5 silicone patches

CA060300 Cooking sensor and set of 5 silicone patches

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI283 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI283

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info