Bedienungsanleitung Gaggenau CI292101 (Seite 45 von 60) (Englisch)

703242

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Home Connect

Notes

– The

•’ƒ setting is only displayed if the appliance

is connected to your home network.

– The •’„ setting is only displayed if the appliance

has previously been connected to a network.

– The •’† setting is only displayed if an update is

available.

– The •’‡ setting is only displayed if the after-sales

service is attempting to connect to the appliance.

You can end this at any time after granting access.

– The •’ˆ and •’‰ settings are only displayed if

there is Wi-Fi connection.

Deactivating WLAN

If Wi-Fi has been activated, you can use the Home

Connect functions.

Note: In networked standby mode, your appliance

requires a maximum of 2 W.

1 Open basic setting ™Š.

2 Touch the ® symbol repeatedly until the •’„ and

’‹¯ settings flash alternately.

‹¯ will be lit on the hotplate display.

3 Set the value to ‹”” using the twist knob.

This deactivates Wi-Fi; the D symbol will go out on the

control panel.

Note: The network settings will be stored. When the

WiFi function is activated again, the hob will try to

reconnect to the previously stored network.

Disconnecting from the network

You can disconnect your hob from the network at any

time.

Note: If your hob is disconnected from the network, it is

not possible to operate it using Home Connect.

1 Open basic setting ™Š.

2 Touch the ® symbol repeatedly until the •’‚ and

¯“£ settings flash alternately.

‹¯ will be lit on the hotplate display.

3 Set the value to ‹”” using the twist knob.

This disconnects the appliance from your home network;

the D symbol will go out on the control panel.

Connecting to the network

1 Open basic setting ™Š.

2 Touch the p symbol repeatedly until the •’‚ and

¯“£ settings flash alternately.

‹”” will be lit on the hotplate display.

3 Use the twist knob to set the value to

’‹‚, "Connect automatically", or

’‹ƒ, "Connect manually".

4 Follow the instructions in the section entitled

"Automatic login to your home network" or

"Manually logging into your home network".

Connect to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your hob.

Notes

– The appliance must be connected to the network.

– The app must be open and be set up.

– If your extractor hood is directly connected, first

disconnect the hob from your home network and

then initiate the connection process again.

~ "Disconnecting from the network" on page 45,

~ "Connecting to the network" on page 45

1 Open basic setting ™Š.

2 Touch the p symbol repeatedly until the •’ƒ and

˜‘‚ settings flash alternately.

‹”” will be lit on the hotplate display.

3 Set the value to ‹¯ using the twist knob.

4 Launch the app on your mobile device and follow

the instructions in the app to complete the

connection process.

When the value ‹¯ stops flashing on the hotplate

display and the value ‹”” lights up again, the login

process is complete.





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CI292101 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CI292101

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info