Installation CK 482
The appliance is installed in a base cabinet with a
width of more than 900 mm. As the hob is fixed in
place, it has to be easily accessible from below in
case of repairs.
The surface of the installed hob should not be
below the worktop surface.
Through dimensional tolerance of the glass ceramic
plate and the worktop cut out, the width of the joint
may vary.
• Clean and degrease the edge of the cut-out, using
a suitable cleaner (follow the instructions given by
the silicone manufacturer).
• Insert the hob with the control panel front right
into the cut-out and align it. Make sure to leave an
even space all round.
• Secure the appliance to the worktop with the
clamping screws included. Make sure the
appliance is flush with the worktop.
27
CK 482 is suitable for flush mounting into
stone or tiled worktops.
Other worksurfaces (i.e. wood, plastic,
Corian, etc.) are unsuitable.
