16
en Preparing beverages
Using a milk carton or other container:
▯ Open the door.
▯ Push the beverage dispenser down completely.
▯ Remove the cover of the beverage dispenser
towards the front.
▯ Feed the milk hose of the milk system outwards
through the opening at the top.
▯ Attach the magnetic holder to the appliance.
▯ Place the filled milk carton on the right next to the
coffee dispenser. Connect the milk tube to the milk
hose and then guide the milk tube into the milk
carton. The end of the milk tube must be immersed
in the milk.
▯ Close the door.
To prepare a drink:
The appliance must be switched on. The water tank and
bean container must be filled.
1 Rotate the function selector to position 2.
2 Using the rotary selector, select a coffee beverage
with milk. To select a beverage made with ground
coffee, you must first fill the ground coffee drawer.
3 Place a cup or glass under the coffee dispenser.
4 Press I to start.
- or -
Touch the C symbol first, then set the size or
strength for example, using the rotary selector.
Confirm with ™.
The milk is drawn in and prepared and then the coffee is
brewed.
Notes
– While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
– Using the ‡ symbol, you can save the current
beverage: Touch the ‡ symbol, turn the function
selector to a free memory location and save the
entry. ~ "Individual beverages" on page 18
– Dried-on milk residues are difficult to remove, so
always clean the milk system after every use.
~ "Cleaning the milk system" on page 24
Preparing milk froth and warm milk
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
To prepare a drink:
The appliance must be switched on.
1 Rotate the function selector to position 2.
2 Connect the milk hose. ~
"Preparing a coffee with
milk" on page 15
3 Select "Milk froth" or "Warm milk" with the rotary
selector.
4 Place a cup or glass under the coffee dispenser.
5 Touch the C symbol.
6 Set the size using the rotary selector.
7 Press ™ to confirm the settings.
8 Press I to start.
The milk is drawn in and then flows into the cup or
glass.
Notes
– While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
– Using the ‡ symbol, you can save the current
beverage: Touch the ‡ symbol, turn the function
selector to a free memory location and save the
entry. ~ "Individual beverages" on page 18
– Dried-on milk residues are difficult to remove, so
always clean the milk system after every use.
~ "Cleaning the milk system" on page 24
Preparing hot water
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
The appliance must be switched on and the water tank
filled.
1 Remove the milk hose from the milk container.
2 Rotate the function selector to position 2.
3 Select "Hot water" using the rotary selector.
4 Place a cup or glass under the coffee dispenser.
5 Touch the C symbol.
6 Set the size using the rotary selector.
7 Touch the C symbol.
8 Set the temperature using the rotary selector.
9 Press ™ to confirm.
10 Press I to start.
The water is heated and then flows into the cup or glass.
