Bedienungsanleitung Gaggenau CMP250111 (Seite 27 von 32) (Englisch)

702884

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Service programmes

Descaling

Duration: approx. 21 minutes

1 Turn the function selector to S.

2 Select "Descaling programme" using the rotary

selector.

3 Touch the ™ symbol.

The descaling programme starts. The notes in the

display guide you through the programme.

4 Empty and replace the drip tray and the coffee

dregs container.

5 Remove the water filter (if there is one) and touch

the ™ symbol.

6 Pour lukewarm water into the empty water tank up

to the "calc" mark (0.5 l) and then dissolve a

descaling tablet in it.

7 Remove the milk tube from the milk container and

wipe it down. Insert the end of the milk tube into the

hole in the coffee residue container.

8 Close the door.

9 Place a container with a capacity of 0.5 l under the

beverage dispenser.

10 Touch the I symbol.

The programme will run for approx. 19 minutes.

Note: If there is too little descaling solution in the

water tank, the message "Fill water tank with water

and descaler" appears. Pour lukewarm water into

the empty water tank up to the "calc" mark (0.5 l)

and then dissolve a descaling tablet in it. Press ™

to confirm. The programme will continue.

11 When prompted by the display, rinse the water tank

and then fill it with fresh water up to the "max" mark.

If a filter is used, reinsert it now.

12 Touch the I symbol.

The programme will run for approx. 2 minutes and

rinse the appliance.

13 Empty and replace the drip tray.

14 Touch the ™ symbol.

The programme has finished.

15 Touch the ™ symbol.

The appliance is ready to use.

Cleaning and descaling

Duration: approx. 26 minutes

The cleaning and descaling programme combines the

individual cleaning and descaling functions. If the two

programmes are both due at around the same time, the

fully automatic espresso machine automatically

suggests this service programme.

Prior to starting the service programme, clean the

brewing unit. ~ "Cleaning the brewing unit"

on page 25

1 Turn the function selector to S.

2 Select "Cleaning and descaling programme" using

the rotary selector.

3 Touch the ™ symbol.

The cleaning and descaling programme starts. The

notes on the display guide you through the

programme.

4 Empty and replace the drip tray and the coffee

dregs container.

5 Place a cleaning tablet in the ground coffee drawer

and close the drawer again.

6 Remove the water filter (if there is one) and touch

the ™ symbol.

7 Pour lukewarm water into the empty water tank up

to the "calc" mark (0.5 l) and then dissolve a

descaling tablet in it.

8 Remove the milk tube from the milk container and

wipe it down. Insert the end of the milk tube into the

hole in the coffee residue container.

9 Close the door.

10 Place a container with a capacity of 0.5 l under the

beverage dispenser.

11 Touch the I symbol.

The programme will run for approx. 19 minutes.

Note: If there is too little descaling solution in the

water tank, the message "Fill water tank with water

and descaler" appears. Pour lukewarm water into

the empty water tank up to the "calc" mark (0.5 l)

and then dissolve a descaling tablet in it. Press ™

to confirm. The programme will continue.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CMP250111 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CMP250111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info