Bedienungsanleitung Gaggenau CV282111 (Seite 49 von 64) (Englisch)

761569

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

en Home Connect

Home Connect settings

You can adjust Home Connect to suit your requirements

at any time.

In the basic settings for your hob, navigate to the Home

Connect settings to display network and appliance

information.

Notes

– The •’ƒ setting is only displayed if the appliance

is connected to your home network.

– The •’„ setting is only displayed if the appliance

has previously been connected to a network.

– The •’† setting is only displayed if an update is

available.

– The •’‡ setting is only displayed if the after-sales

service is attempting to connect to the appliance.

You can end this at any time after granting access.

– The •’ˆ and •’‰ settings are only displayed if

there is Wi-Fi connection.

Deactivating WLAN

If WiFi has been activated, you can use the Home

Connect functions.

Note: In networked standby mode, your appliance

requires a maximum of 2 W.

1Open the basic setting ™š.

2Touch the ® symbol repeatedly until the •’„ and

’‹¯ settings flash alternately.

‹¯ lights up on the hotplate display.

3Set the value to ‹”” using the twist knob.

This deactivates WiFi; the D symbol goes out on the

control panel.

Note: The network settings will be stored. When the

WiFi function is activated again, the hob will try to

reconnect to the previously stored network.

Disconnecting from the network

You can disconnect your hob from the network at any

time.

Note: If your hob is disconnected from the network, it is

not possible to operate it using Home Connect.

1Open the basic setting ™š.

2Touch the ® symbol repeatedly until the •’‚ and

¯“£ settings flash alternately.

‹¯ lights up on the hotplate display.

3Set the value to ‹”” using the twist knob.

This disconnects the appliance from your home network;

the D symbol goes out on the control panel.

Indicator/

symbol

Function

•’‚ / ¯“£ Home network login (Wi-Fi)

‹”” Not connected /disconnect network

’‹‚ Connect automatically

’‹ƒ Connect manually

‹¯ Connected

•’ƒ / ˜‘‚ Connection to app

‹”” Not connected/

‹¯ Connect

•’„ / ’‹¯ Connection to home network (Wi-Fi)

‹”” Wireless module switched off

‹¯ Wireless module switched on

•’… / ¥“† Settings via app

‹”” Switched off

‹¯ Switched on*

•’† / —˜š Software update

š“” Update available and ready for installa-

tion

‚¯† Start installation

•’‡ / ¥“š Remote access by after-sales service

‹”” Not authorised

‹¯ Authorised

•’ˆ / †£¥ Wi-Fi signal strength

¯‘ Not connected to home network (Wi-

Fi)

‚ Signal strength 1(weak)

ƒ Signal strength 2(moderate)

„ Signal strength 3(good)

•’‰ / †“¥ Connection to Home Connect server

¯‘ Not connected

‹¯ Connected

* Basic setting







Home Connect en

Connecting to the network

1Open the basic setting ™š.

2Touch the p symbol repeatedly until the •’‚ and

¯“£ settings flash alternately.

‹”” lights up on the hotplate display.

3Use the twist knob to set the value to

’‹‚ "Connect automatically", or

’‹ƒ "Connect manually".

4Follow the instructions in the section entitled

"Logging into your home network automatically" or

"Logging into your home network manually".

Connect to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your hob.

Notes

– The appliance must be connected to the network.

– The app must be open and be set up.

1Open the basic setting ™š.

2Touch the p symbol repeatedly until the •’ƒ and

˜‘‚ settings flash alternately.

‹”” lights up on the hotplate display.

3Set the value to ‹¯ using the twist knob.

4Launch the app on your mobile device and follow

the instructions in the app to complete the

connection process.

When the value ‹¯ stops flashing on the hotplate

display and the value ‹”” lights up again, the login

process is complete.

Settings via app

Using the Home Connect app, you can easily access the

basic settings for your hob and send settings for the

hotplates to the hob.

Notes

– Before you can change the basic settings, the hob

must be switched off.

– Operating the appliance directly from the appliance

always takes priority. It is not possible to operate

the appliance using the Home Connect app during

this time.

– When the appliance is delivered, the settings

transfer option is already activated by default.

– If the transfer of settings has been deactivated, only

the hob's operating statuses are displayed in the

Home Connect app.

1Open the basic setting ™š.

2Touch the p symbol repeatedly until the •’… and

¥“† settings flash alternately.

3To activate transfer, select the ‹¯ value with the

twist knob. To deactivate transfer, select the ‹””

value.

Confirming settings

As soon as cooking settings are transmitted to a

hotplate, the hotplate indicator will start to flash. To

confirm that you want to use these settings, touch the

flashing indicator ·. To reject these settings, touch any

other button on the hob.

Software update

The software update function is used to update your

hob's software (e.g. for the purpose of optimisation,

troubleshooting or security updates). To do this, you

need to be a registered Home Connect user, have

installed the app on your mobile device and be

connected to the Home Connect server.

As soon as a software update is available, you will be

informed by the Home Connect app, from which you will

also be able to download the update.

Once the update has been successfully downloaded,

you can start installing it via the hob (basic settings,

settings ™š, setting •’†/—˜š) or the Home Connect

app if you are on your local area network.

The Home Connect app will notify you once installation

is complete.







Gaggenau CV282111 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CV282111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info