Bedienungsanleitung Gaggenau CV282111 (Seite 59 von 64) (Englisch)

761569

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

en Frequently Asked Questions (FAQ)

Cookware

Which types of cookware can be used with the induction hob?

Read the information on which types of cookware are suitable for induction.

Why is the hotplate not heating up and why is the heat setting flashing?

The hotplate on which the cookware is standing is not switched on.

Ensure that you have switched on the relevant hotplate.

The cookware is too small for the hotplate that is switched on or it is not suitable for induction cooking.

Read the information on the type, size and positioning of the cookware.

Why is it taking so long for the cookware to heat up or why is it not heating up sufficiently despite being on a high heat

setting?

The cookware is too small for the hotplate that is switched on or it is not suitable for induction cooking.

Read the information on the type, size and positioning of the cookware.

Cleaning

How do I clean the induction hob?

Optimal results can be achieved with cleaning products specifically for use on glass-ceramic surfaces. Do not use harsh

or abrasive cleaning products, dishwasher detergents (concentrates) or floor cloths.

To find out how to clean and care for the hob, refer to the section entitled ~ "Cleaning".

There is water in the cabinet underneath the hob.

Check whether the overflow container is full.

To find out how to clean the overflow container, refer to the section entitled ~ "Cleaning".

How often do I need to clean the overflow container?

Clean the overflow container frequently.

To find out how to clean the overflow container, refer to the section entitled ~ "Cleaning".

How often do I need to clean the metal grease filter?

Clean the metal grease filter regularly.

To find out how to clean and care for the filter, refer to the section entitled ~ "Cleaning".

Trouble shooting en

Trouble shooting

Usually, faults are small matters that are easy to

eliminate. Please read the information in the table

before calling the after-sales service.

mWarning – Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by one

of our trained after-sales technicians. If the appliance is

defective, unplug the appliance from the mains or switch

off the circuit breaker in the fuse box. Contact the after-

sales service.

Fault/indicator or symbol Possible cause Solution

The appliance is not work-

ing

The plug is not plugged into the mains Connect the appliance to the mains electricity sup-

ply

Power failure Check whether other kitchen appliances are work-

ing

The fuse is faulty Check in the fuse box to make sure that the fuse

for the appliance is in working order

The buttons for the ventila-

tion system functions do

not light up.

The motor control system is not working. Call the after-sales service.

The ventilation system is

not working.

The motor or the control system is faulty. Call the after-sales service.

The symbol lighting is not

working.

The control unit is faulty. Call the after-sales service.

” ’•‘¯®“ The activated charcoal filter is saturated. Replace the activated charcoal filter.

~ "Cleaning" on page 52

” ’•‘¯®“ The saturation indicator is lit even though

the filter has been cleaned or replaced.

Reset the saturation indicator. ~ "Resetting the

saturation displays" on page 54

Nothing on the display The power supply has been disconnected. Use other electrical appliances to check whether a

short circuit has occurred in the power supply.

The appliance has not been connected as

shown in the circuit diagram.

Ensure that the appliance has been connected as

shown in the circuit diagram.

Electronics fault. If you are unable to rectify the fault, contact the

technical after-sales service.

A signal sounds The control panel is wet or an object is cov-

ering it.

Dry the control panel or remove the object.

”ƒ / “‰ƒ‹ˆ / “ˆ‹‚† The electronics have overheated and have

switched off the affected cooking zone.

Wait until the electronics have cooled down suffi-

ciently. Then touch any symbol on the hob.

”… / “‰ƒ‹‰ / “ˆ‹‚† The electronics have overheated and all of

the cooking zones have been switched off.

”† + heat setting and sig-

nal tone

There is a hot pan near the control panel.

There is a risk that the electronics will over-

heat.

Remove the pan. The fault code will go out shortly

afterwards. You can resume cooking.

”† and signal tone There is a hot pan near the control panel.

The cooking zone has been switched off to

protect the electronics.

Remove the pan. Wait a few seconds. Touch any

touch control. When the fault code on the display

goes out, you can resume cooking.

”‚ / ”‡ The cooking zone has overheated and has

been switched off to protect your work sur-

face.

Wait until the electronics have cooled down suffi-

ciently before switching the cooking zone on again.

”‰ The cooking zone has been operating con-

tinuously for an extended period.

The automatic safety cut-out function has been acti-

vated. See the section entitled ~ "Automatic

safety cut-out" on page 40.

”Š The flex function cannot be activated. Touch any touch control to check the fault code.

You can use the remaining cooking zones to cook

as usual. Contact our technical after-sales service.

Do not place hot pans on the control panel.

Gaggenau CV282111 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau CV282111

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info