Bedienungsanleitung Gaggenau CX482100 (Seite 25 von 56) (Englisch)

761927

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Keep warm function

Keep warm function

This function is suitable for melting chocolate or butter

and for keeping food warm.

Activating

Select the relevant cooking position and then set the

power level to ò.î£ in the settings area.

Deactivating

Touch the cooking position display and select any

power level in the settings area.

This function has now been deactivated.

Transfer function

This function lets you transfer the selected power level

or temperature setting and the cooking time from one

cooking position to another.

If you remove an item of cookware from the cooking

surface or move it, the cooking position it was

previously on stops heating. The settings for the

cooking position will be retained for 30 seconds.

When you place the cookware back in this position, the

same settings will be used.

Activation

1Place an item of cookware on the cooking surface.

The ˆ symbol will appear on the new cooking

position.

2Touch the ˆ symbol on the new cooking position

to confirm transfer of the settings. The power level

will light up.

The settings have been transferred to the new cooking

position.

Wireless temperature sensor en

‚

Wireless temperature sensor

Wi reless temperature sensor

You will need to connect the wireless temperature

sensor to the hob before using cooking sensor mode for

the first time.

Preparing and maintaining the

wireless temperature sensor

This section provides information on:

▯Attaching the silicone patch

▯Attaching the wireless cooking sensor

▯Cleaning

▯Replacing the battery

The silicone patch and temperature sensor can be

purchased from specialist retailers or through our

technical after-sales service or our official website. To

do this, quote the relevant reference number:

Adhering the silicone patch

The silicone patch secures the cooking sensor to the

cookware.

When using a saucepan with cooking sensor mode for

the first time, the silicone patch must be attached

directly to this saucepan. Proceed as follows:

1That the adhesive area on the pan is free from

grease. Clean the pan, dry it thoroughly and wipe

the adhesive area with a spirit.

2Remove the protective film from the silicone patch.

Adhere the silicone patch to the outside of the pan

in the correct place using the enclosed template as

a guide.

3Press down all over the surface of the silicone

patch, including in the centre.

The adhesive requires one hour to fully harden. Do not

use or clean the pan during this time.

Notes

– Do not leave the pan with the silicone patch to soak

soapy water for long periods of time.

– If the silicone patch comes off, attach a new one.

Fitting the wireless temperature sensor

Attach the temperature sensor to the silicone patch and

align it correctly.

Notes

– Ensure that the silicone patch is completely dry

before attaching the cooking sensor.

– Fill the pot so that the contents reach high enough

to cover the cooking sensor's silicone patch.

– To prevent overheating, do not attach the cooking

sensor to other hot cookware.

– Remove the cooking sensor from the pot after

cooking. Store it in a clean, safe place away from

sources of heat.

– You can use up to three cooking sensors at the

same time.

Connecting the wireless temperature

sensor to the control panel

To connect the wireless temperature sensor to the

control panel, follow the instructions below:

1Touch the t on the main screen.

2Select the Cooking sensor pairing option and then

touch the G symbol to confirm your choice.

3Briefly touch the ¨ symbol on the wireless cooking

sensor within the next 30 seconds.

After a few seconds, the result of the connection

between the cooking sensor and the control panel

will appear on the display.

Then touch the G symbol to confirm.

4To connect another cooking sensor, touch the

G symbol. To return to the basic settings, touch

the ' symbol.

The Cooking sensor mode is available once the cooking

sensor has been connected to the control panel

correctly.

00577921 Set of 5 silicone patches

CA060300 Temperature sensor and set of 5 silicone

patches

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau CX482100 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info