Bedienungsanleitung Gaggenau CX482110 (Seite 13 von 56) (Englisch)

761928

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

en Getting to know your appliance

Cookware mode

The hob has various functions for the cooking position.

To access the cookware mode menu, tap the cooking

position display and then touch the i button.

Cooking position display

When you place an item of cookware on the cooking

surface, the indicator for the relevant cooking position

will light up on the touchscreen display.

Residual heat indicator

The hob has several residual heat indicators f to warn

you that one or more cooking positions is/are still hot.

One, two or all three bars of the indicator f will light up

depending on how strong the residual heat is. Do not

touch the cooking surface while the indicators are still

lit or immediately after they have switched off.

The residual heat indicators will remain lit for as long as

the cooking surface is still hot, even if you switch off the

hob.

Cookware mode Function

Ð Dynamic cooking

for an item of cookware

Allows a particular heat setting to

be selected based on the position

of the cookware by moving it from

front to back on the cooking sur-

face.

Ñ Classic cooking for

an item of cookware

Allows the heat setting for each

item of cookware to be selected on

the control panel.

¨ Cooking sensor You can use the cooking sensor

that is attached to the outside of the

pan to automatically keep the tem-

perature at a set level. Cooking sen-

sor mode is suitable for food that

requires large quantities of water,

oil or fat for boiling or deep-fat fry-

ing in the pan.

È Teppanyaki This enables the teppanyaki surface

to be divided into two sections. This

means you can fry food on one sec-

tion and keep food warm on the

other section, or use the entire area

to fry food at the same heat setting.

Cooking position detected

The cookware was detected on the cook-

ing position. The cooking position dis-

play lights up. Touch the # symbol to

select the cooking position.

Cooking position selected

The indicated cooking position has been

selected. You can now set the power

level.

Cooking position switched on

The indicated cooking position has been

switched on. The selected power level

lights up in the display.

There is no cookware on the cooking position

The cookware has been removed from

the cooking position. The selected

power level is dimmed.

Other indicators and symbols

The settings for the selected hotplate

cannot be configured.

For more information, touch the display.

Possible causes:

▯Up to five items of cookware evenly

distributed over the cooking surface

can be heated at the same time.

▯The cookware is not suitable for use

on an induction hob.

▯The appliance has exceeded its maxi-

mum power consumption.















PLQ

















PLQ



Operating the appliance en

Operating the appliance

This chapter explains how to set a cooking position. The

table shows heat settings and cooking times for various

meals.

First-time use

When you switch on the appliance for the first time, the

menu for selecting the initial settings appears on the

display. Select the settings you require.

Once you have confirmed these settings, the main

screen will appear.

Note: You can change the settings at any time.For

information on how to select these settings, see the

section entitled ~ "Basic settings".

Switching the hob on and off

The main switch is used to switch the hob on and off.

To switch the hob on: Touch the # symbol. The

indicator above the main switch lights up. After a short

switch-on time, the hob will be ready for operation.

To switch the hob off: Touch the # symbol. The display

switches off. All the cooking positions are switched off.

The residual heat indicator will remain lit until the

cooking positions have cooled down sufficiently.

Notes

– The hob will automatically switch off if the cooking

positions have been switched off for more than

30 seconds.

– The settings are stored for 10 seconds after the

hob has been switched off. If you switch the hob

back on during this time, the option to confirm the

previous settings will appear on the main screen.

For information on this setting, see the section

entitled ~ "Basic settings".

Configuring cooking position settings

The required heat setting is selected in the settings

area.

Each heat setting has an intermediate setting ending in

.5.

Notes

– To protect the fragile parts of your appliance from

overheating and electrical overloading, the hob may

temporarily reduce the power.

– In order to prevent the appliance from producing

excess noise, the hob may temporarily reduce the

power.

Selecting a hotplate and heat setting

The hob must be switched on.

1Place the cookware on the cooking surface.

2Touch the # symbol for the cooking position on the

touchscreen display. The settings area will light up

on the cooking position display.

3Within the next 4 seconds, scroll up with your finger

and select the heat setting you require.

To select heat setting 9.0, tap 9.0 directly.

The heat setting is set.

Heat setting 1.0 = lowest setting

Heat setting 9.0 = highest setting

PLQ











Gaggenau CX482110 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info