24
White stains on the utensils/glasses remain
milky.
If phosphate-free detergents are used with hard tap
water, white deposits may be deposited more easily on
utensils and the container walls.
Too little/unsuitable detergent.
Too weak programme selected.
No/too little rinse aid.
No/too little special salt.
Water softening system set to the wrong value.
Salt dispenser lock not fastened.
Contact the detergent manufacturer, in particular if:
the utensils are very wet at the end of the
programme.
limescale forms.
Dull, discoloured glasses, film cannot be washed
off.
Unsuitable detergent.
Glasses not dishwasher-proof.
Streaks on glasses and cutlery, glasses have
metallic appearance.
Too much rinse aid.
Plastic parts discoloured.
Too little/unsuitable detergent.
Too weak programme selected.
Rust spots on the cutlery.
Cutlery not rust-resistant.
Salt content in the rinsing water too high, as salt
dispenser lock not fastened firmly or salt was
spilled while being refilled.
Utensils not dry.
Appliance door opened too early and utensils
taken out too early.
Programme selected without drying.
Too little/unsuitable rinse aid.
Activate intensive drying.
The combined detergent used has a poor drying
performance.
Use rinse aid (see Rinse aid chapter for setting).
Customer service
If the advice given does not resolve your problem,
please contact your customer service. Contact details
can be found on the back cover of this instruction
manual or in the enclosed customer service list. When
calling , please quote the appliance number (1) and
the production date (FD = 2) which can be found on
the rating plate 9J on the appliance door.
Rely on the expertise of the manufacturer. Call
us to ensure that the repair will be carried out by fully-
trained service engineers, who are equipped with
original spare parts for your appliance.
