35
– Press the (Confirm) key to start pyrolysis. An
audible signal is sounded.
– In the display, the (Door lock) and
(Pyrolysis) symbols light up.
For your safety, the oven door is locked immediately.
The (Door lock) symbol lights up in the display.
The oven lighting goes off and the (Heating)
symbol lights up in the display. The oven starts the
pyrolysis process and, depending on the degree of
soiling, automatically selects the required pyrolysis
time between 2:00 and 3:30 h.
The pyrolysis locking and unlocking process takes
about 30 seconds. The (Door lock) symbol
lights up during this time.
Do not try to open the oven door during the
self-cleaning process.
Tip: Wait until the appliance indicates that the
pyrolysis process has ended. This ensures that you
will achieve an optimum cleaning result.
Note: During the pyrolysis process, it is not
possible to query the temperature value nor the
time.
End of pyrolysis:
After pyrolysis process has ended, an audible
signal sounds and the the (Cooking time) and
(Pyrolysis) symbols flash. Press any key and turn
the “Temperature" control knob to the 0 position
and the “Modes" knob to a position other than
Pyrolysis. Pay attention to the fact that the door is
not unlocked until at a temperature of 150 °C or
less.
Ending the pyrolysis process before expiry of
the entered time:
– Turn the “Temperature" control knob to the 0
position and the “Mode" control knob to a position
other than Pyrolysis.
– Pay attention to the fact that the door is not
unlocked until at a temperature of 150 °C or less.
Starting pyrolysis at a later time:
– Enter the required switch-off time (see
Chapter 3).
– Turn the control knob to the Pyrolysis setting as
described above.
Note: if a switch-off time is programmed, the oven
assumed the maximum pyrolysis time of 3:30 h.
In this mode of operation (auto pyrolysis), even
stubborn soiling is burnt away at temperatures
around 485 °C.
After the pyrolytic cleaning process, you can
remove the ash easily from the oven using a moist
cloth.
