761604
12
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
12
en Operating the appliance
Display lock for cleaning
You can use this function to switch off the touch
function of the controls for 10 seconds. During this time
you can clean the display.
~ "Cleaning the display" on page 20
1Press à button to open the main menu.
2Press I button.
The cleaning display appears and the countdown starts.
Self-test
This function can be used to start fault analysis on your
appliance.
~ "Appliance self-test" on page 23
Setting the brightness of the control
panel
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button.
4Press % button to open the menu item Brightness.
5Press B C buttons to set the required brightness.
6Press button.
The setting is saved.
7Press ' button to exit the menu.
Switching standby screen on and off
If you switch on the standby screen, you can select what
is displayed on the control panel when the door is
closed.
1Press the à button to open the main menu.
2Press the B button to move to the menu item Basic
settings.
3Press the button.
4Use the C button to scroll to the Standby screen
menu item.
5Press the % button.
6Use B C buttons to select whether the Standby
screen is switched on or off.
7Press the button.
8When the Standby screen has been switched on,
you can use the B C buttons to select whether the
logo or the temperature is displayed with the
functions switched on.
9Press the button.
The setting is saved.
10 Press ' button to exit the menu.
Setting up the display screen
You can choose between the settings Reduced and
Standard. With the setting Reduced only the
temperature and active special functions are displayed
on the control panel after a short period without
operation. If the touch fields are touched, all buttons
will be visible again.
With the setting Standard all buttons always remain
visible.
1Press à button to open the main menu.
2Press B button to move to the menu item Basic
settings.
3Press button.
4Use C button to move to the menu item Display
screen.
5Press % button.
6Press B C buttons to move to the required setting.
7Press button.
The setting is saved.
8Press ' button to exit the menu.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gaggenau RW466564 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Gaggenau RW466564

Gaggenau RW466564 Bedienungsanleitung - Holländisch - 23 seiten

Gaggenau RW466564 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info