Bedienungsanleitung Gaggenau VI 414 103 (Seite 21 von 36) (Englisch)

760913

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Locking the control panel for cleaning

Setting procedure

Select the appropriate temperature level from the table.

Set an empty item of cookware down on the cooking

zone.

1Use the control knob to select the temperature

setting you require. Temperature settings 1to 5are

available for this function; see temperature settings

table.

2Touch the Ú symbol; it will be lit orange.

‘ and the temperature setting you have selected

will be lit.

The function has now been activated.

The ¬, « or ª temperature indicator and the

temperature setting you have selected will remain lit

until the frying temperature has been reached. An

audible signal will then sound and the temperature

indicator will go out.

3Once the frying temperature has been reached, add

the fat and then the food to the pan.

Notes

– If a temperature setting above 5is selected,

setting † will automatically be set. In this case, turn

the control knob to position 5.

– Turn the food so that it does not burn.

Switching off the frying sensor

Turn the control knob that was used to select the

temperature to position 0. The hotplate will switch off

and the residual heat indicator will appear.

Locking the control panel for cleaning

Wiping over the control panel while the hob is switched

on may alter the settings. To avoid doing this, you can

use the hob's "Lock control panel for cleaning" function.

To switch on: Touch the − symbol. An audible signal

will sound. The indicators for the active functions will

flash. The control panel will be locked for 10minutes.

You will now be able to clean the surface of the control

panel without altering the settings.

To switch off: Touch the − symbol again within the next

10minutes.

If the function is not deactivated within these

10minutes, the hob will switch itself off.

Notes

– The locking function does not affect the control

knob. The hob can be switched off at any time.

– While the lock is active, the power supply to the

hob is stopped. The hotplate may still be hot.

Automatic safety switch-off function

Automati c safety swi tch-off functi on

For your protection, the appliance features a safety

switch-off function. Depending on which heat setting

has been selected, the hotplate's heating element will

be deactivated if no further action is performed within a

set time after selecting the heat setting.

An audible signal will indicate when this time has

elapsed. The control knob is active and the illuminated

ring around it will flash. ”‰ will be lit on the hotplate

display.

Turn the control knob to position 0. The appliance can

now be switched back on as usual.

 

Heat setting Deactivated after

‚10hours

ƒ to …5hours

† to ˆ4hours

‰3hours

Š to ‚‹ 2hours

‚‚ to ‚ƒ 1hour

Frying sensor temperature setting Deactivated after

‚ to †3hours

Basic settings en

Basic settings

Basic setti ngs

The appliance has various basic settings. These basic

settings can be altered to suit your individual

requirements.

Notes

– The ™†, ™‡, ™ˆ and ™‰ settings are only displayed

if the appliance is connected to an extractor hood.

– The ™ˆ and ™‰ settings are only displayed if the

appliance is connected to an extractor hood with

lighting.

To access the basic settings:

The hob must be off.

1Carry out the following operating steps one after

the other without interruption.

2Push in the control knob and turn it anti-clockwise

to Ž. Keep the control knob pressed in.

3Turn the control knob clockwise to position 1. Keep

the control knob pressed in.

4Turn the control knob anti-clockwise to position 0.

The t symbol will be lit. The illuminated ring

around the control knob will be lit yellow.

Display Function

™‚ Signal tones

‹¯ All signal tones activated.*

‹”” Only fault signal activated.

™ƒ Power management function. Limit the total

power of the hob (watts)

‹”” Deactivated.*

‚‹‹‹ Lowest setting

‚†‹‹

ƒ‹‹‹

...

Š†‹‹ Highest setting on the hob

™„ Check cookware; cooking results

‹Not suitable

‚Not ideal

ƒSuitable

™… Restore standard settings

‹”” Individual settings.*

‹¯ Restore factory settings.

™† Automatic fan start-up

‹”” Switched off.

The extractor hood must be switched on manually,

if required.

‘Switched on in automatic mode.*

In automatic mode, the extractor hood switches

itself on when you switch on one of the cooking

zones.

‚/ƒ/„Switched on in manual mode.

The extractor hood switches itself on at a fixed fan

setting when you switch on any of the cooking

zones.

* Basic setting

™‡ Fan run-on

‹”” The fan switches itself off when the hob is

switched off.

Not recommended for the extractor hood in air cir-

culation mode

¥Fan run-on in automatic mode.*

¯‹ Fan run-on with the most recently selected setting.

™ˆ Automatic switch-on of extractor hood lighting

‹”” Switched off.*

‹¯ Switched on.

The light switches itself on when the hob is

switched on.

™‰ Automatic switch-off of extractor hood lighting

‹”” Switched off.*

The light switches itself off when you switch off the

hob.

‹¯ Switched on.

The light switches itself on when you switch off the

hob.

¥—¯ Switched on.

The light switches itself on when the fan runs on

and goes out when the fan run-on time ends.

Display Function

* Basic setting

 

Gaggenau VI 414 103 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau VI 414 103

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info