Bedienungsanleitung Gaggenau VI414104 (Seite 9 von 36) (Englisch)

760912

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Environmental protection

Environmental protection

Envi ronmental protecti on

In this section, you can find information about saving

energy and disposing of the appliance.

Energy-saving advice

▯Always use the correct lid for each pan. Cooking

without a lid uses a lot more energy. Use a glass lid

to provide visibility and avoid having to lift the lid.

▯Use pans with flat bases. Bases that are not flat use

a lot more energy.

▯The diameter of the pan base must match the size

of the hotplate. Please note: pan manufacturers

usually provide the diameter for the top of the pan,

which is usually larger than the diameter of the pan

base.

▯Use a small pan for small amounts of food. A large

pan which is not full uses a lot of energy.

▯Use little water when cooking. This saves energy

and preserves all the vitamins and minerals in

vegetables.

▯Select the lowest power level to maintain cooking. If

the power level is too high, energy is wasted.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly

manner.

Induction cooking

Inducti on cooking

Advantages of induction cooking

Induction cooking is very different from traditional

cooking methods, as heat builds up directly in the item

of cookware. This offers numerous advantages:

▯Saves time when boiling and frying.

▯Saves energy.

▯Easier to care for and clean. Spilled food does not

burn on as quickly.

▯Heat control and safety – the hob increases or

decreases the heat supply as soon as the user

changes the setting. The induction hotplate stops

the heat supply as soon as the cookware is removed

from the hotplate, without having to switch it off

first.

Cookware

Only use ferromagnetic cookware for induction cooking,

such as:

▯Cookware made from enamelled steel

▯Cookware made from cast iron

▯Special induction-compatible cookware made from

stainless steel.

To check whether your cookware is suitable for

induction cooking, refer to the section entitled

~ "Cookware test".

To achieve a good cooking result, the ferromagnetic

area on the base of the pan should match the size of the

hotplate. If a hotplate does not detect an item of

cookware, try placing it on another hotplate with a

smaller diameter.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning

used electrical and electronic appliances

(waste electrical and electronic equipment -

WEEE). The guideline determines the

framework for the return and recycling of used

appliances as applicable throughout the EU.

FP FP

FP

Induction cooking en

Some induction cookware does not have a fully

ferromagnetic base:

▯If the base of the cookware is only partially

ferromagnetic, only the area that is ferromagnetic

will heat up. This may mean that heat will not be

distributed evenly. The non-ferromagnetic area may

not heat up to a sufficient temperature for cooking.

▯The ferromagnetic area will also be reduced if the

material from which the base of the cookware is

made contains aluminium, for example. This may

mean that the cookware will not become sufficiently

hot or even that it will not be detected.

Unsuitable pans

Never use diffuser hobs or pans made from:

▯common thin steel

▯glass

▯earthenware

▯copper

▯aluminium

Properties of the base of the cookware

The material(s) from which the base of the cookware is

made can affect the cooking result. Using pots and pans

made from materials that distribute heat evenly through

them, such as stainless-steel pans with a three-layer

base, saves time and energy.

Use cookware with a flat base; if the base of the

cookware is uneven, this may impair the heat supply.

No cookware on hotplate/cookware of an unsuitable

size

If no cookware is placed on the selected hotplate, if the

cookware is made of an unsuitable material or if it is not

the right size for the hotplate, the hotplate indicator will

start to flash. To stop the indicator flashing, place

suitable cookware on the hotplate. If it is left flashing for

more than 9minutes, the hotplate will automatically

switch off.

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base.

The hob is equipped with an internal safety system.

However, an empty pan may heat up so quickly that the

"automatic switch off" function may not have time to

react and the pan may reach very high temperatures.

The base of the pan could melt and damage the glass on

the hob. In this case, do not touch the pan and switch

the hotplate off. If it fails to work after it has cooled

down, please contact the Technical Assistance Service.

Pan detection

Each hotplate has a lower limit for pan detection. This

depends on the diameter of the ferromagnetic area of

the cookware and the material from which its base is

made. For this reason, you should always use the

hotplate that best matches the diameter of the base of

the pan.

Automatic detection in two-ring and three-ring

hotplates

These hotplates can detect cookware of different sizes.

Depending on the material and the properties of the

cookware, the hotplate automatically activates the one-,

two- or three-ring hotplate in order for the correct heat

output to be supplied to achieve good cooking results.

Gaggenau VI414104 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau VI414104

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info