Bedienungsanleitung Gaggenau VI462113 (Seite 15 von 36) (Englisch)

760883

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Flexible cooking zone

}

Flexible cooking zone

Flexi ble cooking zone

You can use each flex zone as a single hotplate or as

two independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Note: Only use cookware with a suitable diameter. The

base of the cookware should not protrude over the

marked cooking zones.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As two independent hotplates

The flexible cooking zone is used like two independent

hotplates.

Activating

See section ~ "Operating the appliance".

As a single hotplate

Using the entire cooking zone by connecting both

hotplates.

Linking the two hotplates

1Set down the cookware. Turn one of the control

knobs to position ª.

2Use the other control knob to select the heat

setting. The ª indicator will be lit. The heat setting

will be lit on the displays for the two hotplates.

The Flex cooking zone has now been activated.

Changing the heat setting

To alter the heat setting, use the same control knob you

used to select the original heat setting.

Adding new cookware

Set down the new cookware. Turn the control knob that

was used to select the Flex cooking zone to position

0and then back to position ª.

The cookware will be detected and the heat setting that

was previously selected will be retained.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Unlinking the two hotplates

Turn the control knob that was used to select the Flex

cooking zone to position 0. The « indicator will be lit.

The Flex cooking zone has now been deactivated. The

two hotplates will now function independently.

Note: If you switch the hob off and then subsequently

switch it on again, the flexible cooking zone is converted

back to two independent hotplates.

As a single hotplate

Diameter smaller than or equal to

13cm

Place the cookware on one of the four

positions that can be seen in the illus-

tration.

Diameter greater than 13cm

Place the cookware on one of the

three positions that can be seen in the

illustration.

If the cookware takes up more than

one hotplate, place it starting on the

upper or lower edge of the flexible

cooking zone.

As two independent hotplates

The front and rear hotplates each have two

inductors and can be used independently of

each other. Select the required heat setting

for each of the hotplates. Use only one item

of cookware on each hotplate.

FlexPlus cooking zone en

}

FlexPlus cooking zone

The hob has a FlexPlus cooking zone which is located

between the two flexible cooking zones and which

switches on in conjunction with the right- or left-hand

flexible cooking zone. This means that larger cooking

vessels can be used and better cooking results can be

achieved.

The FlexPlus cooking zone always switches on in

conjunction with one of the two flexible cooking zones.

It is not possible to activate these cooking zones

independently.

Notes regarding cookware

The cookware should be positioned centrally for good

thermal detection and distribution.

The cookware should cover the side hotplate and the

FlexPlus cooking zone.

Depending on the size of the cookware, the flexible

cooking zone can be activated as two independent

hotplates or as one hotplate:

Activation

1Set down the cookware on the hotplate and make

sure that it also covers the FlexPlus cooking zone.

2Select the hotplate and the required heat setting.

The hotplate and FlexPlus cooking zone indicators

light up.

The flexible cooking zone is activated.

Note: If the two cooking zones next to the FlexPlus

cooking zone are covered by cookware, the FlexPlus

cooking zone indicator may flash.

To link the FlexPlus cooking zone to the corresponding

cooking zone, lift the cookware and set it back down on

the cooking zone before selecting a heat setting.

Deactivating

Remove the cookware from the hotplate. The displays

go out.

This deactivates the FlexPlus cooking zone.

Set down the cookware

Oblong cookware

Activate the flexible cooking zone

as two independent hotplates or

as one hotplate.

Large round cookware

Activate the flexible cooking zone

as a single hotplate.

The vessel must not cover the

two side cooking zones and the

FlexPlus cooking zone at the

same time.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau VI462113 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau VI462113

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info