Bedienungsanleitung Gaggenau VI462113 (Seite 29 von 36) (Englisch)

760883

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Connecting the extractor hood

Establishing a connection via the home network

1Open the Home Connect settings menu.

~ "Opening or closing the Home Connect

settings menu" on page 23

2Log in to the home network manually or

automatically; see ~ "Manual registration in the

home network" on page 24 or ~ "Logging in to

your home network automatically (WPS)"

on page 25.

Once the hob is connected to your home network,

you can connect to the extractor hood via the Home

Connect app. To do this. follow the instructions on

your mobile device.

Connecting another hob to the extractor hood

1Connect both hobs to Home Connect. ~ "Manual

registration in the home network" on page 24 or

~ "Logging in to your home network

automatically (WPS)" on page 25

2Connect the extractor hood to Home Connect.

Follow the instructions in the user manual for your

extractor hood.

3In the Home Connect app, connect the first hob to

the extractor hood.

4In the Home Connect app, connect the second hob

to the extractor hood.

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, it cannot be connected to your home network as

well. The appliance functions in the same way as a hob

with no network connection and can still be operated via

the control panel.

Before connecting the appliances, reset all existing

connections to your home network or other appliances.

Establishing a direct connection

Make sure that the extractor hood is switched on and is

in search mode. Search mode means that the

connection process on the extractor hood has been

started.

Refer to your extractor hood's user manual for more

information.

1Open the Home Connect settings menu.

~ "Opening or closing the Home Connect

settings menu" on page 23

2Turn the control knob clockwise to position 2.

After around 5seconds, the illuminated ring around

the control knob flashes blue and yellow alternately.

••’ is displayed on the control panel. The hob is

connected to the extractor hood once the

illuminated ring on the control knob permanently

lights up green.

3Close the Home Connect settings menu.

~ "Opening or closing the Home Connect

settings menu" on page 23

The illuminated ring on the control knob goes out.

Direct connection unsuccessful

If, after around 30seconds, a connection could not be

established, the illuminated ring around the control

knob lights up red. Turn the control knob to another

position and then back to position 2.

The illuminated ring on the control knob lights up blue.

After around 5seconds, the illuminated ring around the

control knob flashes blue and yellow. The appliance is

trying to establish a connection again.

Connecting another hob to the extractor hood

In order to connect another hob to the extractor hood,

run through the direct connection again with the second

hob.

Controlling the extractor hood via the

hob

In the Home Connect app, you can adjust the behaviour

of your extractor hood depending on whether the hob or

individual cooking zones are switched on or off.

Cookware test en

Cookware test

This function can be used to check the speed and

quality of the cooking process depending on the

cookware.

The result is a reference value and depends on the

properties of the cookware and the hotplate being used.

1Fill the pan with approximately 200 ml water and

place it at room temperature in the middle of the

hotplate that most closely matches the diameter of

the pan base.

2Go to the basic settings and select the ™„ setting.

‹”” will be lit.

3Touch the @ or A symbol. ‹¯ will be lit. A signal

tone will sound and the hotplate indicators will be

lit.

The function has now been activated.

¥—¯ will be lit. After a few seconds, the hotplate

displays will show the results for the quality and speed

of the cooking process.

Check the result using the following table:

To activate the function again, select the @ or A symbol.

Notes

– Do not use the wok or wok accessories with this

function.

– The Flex cooking zone is set to function as a single

hotplate; only test one item of cookware at a time on

it.

– If the diameter of the hotplate that is used is much

smaller than the diameter of the cookware, only the

middle of the cookware can be expected to heat up.

This may result in the cooking results not being as

good as expected or being less than satisfactory.

– You can find information on this function in the

section entitled ~ "Basic settings".

– You can find information on the type, size and

positioning of the cookware in the sections entitled

~ "Induction cooking" and ~ "Flexible cooking

zone".

Result

‹The cookware is not suitable for the hotplate and will

therefore not heat up.*

‚The cookware is taking longer to heat up than expected

and the cooking process is not going as well as it

should.*

ƒThe cookware is heating up correctly and the cooking

process is going well.

* If there is a smaller hotplate available, test the cookware

again on the smaller hotplate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gaggenau VI462113 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Gaggenau VI462113

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info